Regardless you feel you can’t see properly at nighttime, regardless whether you feel you’re lighting too low or too high, in all of these situations, there’s only one component of your vehicle to blame – your low beams. Despite the fact this correction may appear simple thanks to the thumbwheel on your dashboard, a full correction is much more technical than this basic realignment, and in this article, we will see how to adjust the low beam lights of your Toyota Yaris 3? For this, first of all we will see why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Toyota Yaris 3.
Why adjust the low beam lights of your Toyota Yaris 3?
So let’s commence our article with the interest of adjusting the low beam lights of your Toyota Yaris 3. For many of us these lights are good enough adjusted, and it seems that they light up enough at night. However this is not always the case and checking out this setting, either because the low beams of your Toyota Yaris 3 are not lighting up well, or because you have the feeling that they are too weak or too powerful is a good option .
Adjusting the low beam of your Toyota Yaris 3 for safety is a good option.
To begin, the adjusting of the dipped headlights of an Toyota Yaris 3 must be done for a ordinary safety cause. Regardless whether it’s for you, or for the other users you come across during your night journeys. In reality, if you don’t see enough, the risk is to fail to see an obstacle on the route, or to predict a curve badly. On the flip side, if your lights are too powerful, you risk dazzling the car owners in front of you, and thus putting yourself in danger. It is consequently crucial for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Toyota Yaris 3 for law justifications
Furthermore to safety, there is a law that supervises the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at minimum , 30 meters. Another law supervises their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Toyota Yaris 3?
We will now go forward to the section that interests you the most in this article, how to adjust the low beams of his Toyota Yaris 3? This setting may appear to be a bit complicated, but if you follow the guidelines you should be able to do it without too much difficulty.
Preparations to set the low beam of a Toyota Yaris 3
To start, you will need to prepare your vehicle to adjust your low beam lights in good conditions, here are the preparations to do:
- Place your vehicle on a floor in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure rigorously.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unnecessary weight from the vehicle, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Toyota Yaris 3
Once your vehicle is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then step back your vehicle up to a distance of between 7 and 10 metres. For the rest of the procedure here are the guidelines to follow:
- Open your bonnet, situate the screws for horizontal and vertical adjustment of the lights of your Toyota Yaris 3 (they are usually marked, and those above must adjust the verticality and those on the side adjusts the horizontality of the adjustment).
- Use a cloth or something else to hide the light on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once complete, check that the low beam setting of your Toyota Yaris 3 is consistent on the road, do not hesitate to check that it has been driven, in some cases it may move.
.
If you want to adjust the fog lights on your Toyota Yaris 3, please browse our article on this subject.
Whenever you have any further questions about the Toyota Yaris 3, do not hesitate to consult our Toyota Yaris 3 category.
