It doesn’t matter if you feel you can’t see properly at nighttime, regardless you feel you’re lighting too low or too high, in all of these occasions, there’s only one part of your automobile to blame – your low beams. Although this adjustment may seem simple thanks to the thumbwheel on your dashboard, a whole adjustment is much more technical than this common realignment, and in this article content, we will see how to adjust the low beam lights of your Toyota Venza? For this, first we will see why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Toyota Venza.
Why adjust the low beam lights of your Toyota Venza?
So let’s start our article content with the interest of adjusting the low beam lights of your Toyota Venza. For a lot of people these lights are sufficiently adjusted, and it seems that they light up enough at night. Sadly this is not necessarily the case and checking this setting, either because the low beams of your Toyota Venza are not lighting up well, or because you have the feeling that they are too weak or too powerful is a wise decision .
Adjusting the low beam of your Toyota Venza for safety is a wise decision.
To start, the adjusting of the dipped headlights of an Toyota Venza must be done for a ordinary safety cause. It doesn’t matter if it’s for you, or for the other users you encounter during your night journeys. Indeed, if you don’t see enough, the risk is to miss an obstacle on the road, or to anticipate a curve badly. However, if your lights are too powerful, you risk dazzling the people in front of you, and thus putting yourself in danger. It is subsequently important for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Toyota Venza for legal justifications
Furthermore to safety, there is a law that supervises the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at least 30 meters. Another law supervises their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Toyota Venza?
We will now go forward to the section that interests you the more in this article content, how to adjust the low beams of his Toyota Venza? This setting may seem to be a bit difficult, but if you stick to the guidelines you should be able to do it without too much issue.
Preparations to set the low beam of a Toyota Venza
Firstly, you will need to prepare your automobile to adjust your low beam lights in good conditions, here are the preparations to put in place:
- Place your automobile on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Examine your tire pressure carefully.
- Examine that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the automobile, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Toyota Venza
Once your automobile is set up, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then step back your automobile up to a distance of between 7 and 10 metres. For the rest of the operation here are the basic steps to stick to:
- Open your bonnet, identify the screws for horizontal and vertical adjustment of the lights of your Toyota Venza (they are generally marked, and those above must adjust the verticality and those on the side adjusts the horizontality of the adjustment).
- Use a cloth or some thing else to hide the light on which you are not making the manipulation.
- Using the screws to make the horizontal manipulation, you should have the most strong part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once accomplished, check that the low beam setting of your Toyota Venza is consistent on the road, do not hesitate to check that it has been driven, sometimes it may move.
.
If you want to adjust the fog lights on your Toyota Venza, please go through our article content on this subject.
In the event that you have any additional questions about the Toyota Venza, do not hesitate to consult our Toyota Venza category.
