Regardless whether you feel you can’t see properly through the night, regardless you feel you’re lighting too low or too high, in all of these occasions, there’s only one component of your motor vehicle to blame – your low beams. Although this correction may seem to be simple thanks to the thumbwheel on your dashboard, a whole correction is much more technical than this ordinary realignment, and in this article content, we will discover how to adjust the low beam lights of your Cadillac CTS? For this, first we will discover why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Cadillac CTS.
Why adjust the low beam lights of your Cadillac CTS?
So let’s commence our article content with the point of adjusting the low beam lights of your Cadillac CTS. For many people these lights are well enough adjusted, and it looks like that they light up enough at night. However this is not automatically the case and looking at this setting, either because the low beams of your Cadillac CTS are not lighting up well, or because you have the feeling that they are too low or too strong is a good idea .
Adjusting the low beam of your Cadillac CTS for safety is a good idea.
Firstly, the adjusting of the dipped headlights of an Cadillac CTS must be done for a elementary safety reason. It doesn’t matter if it’s for you, or for the other drivers you come across during your night journeys. Indeed, if you don’t see enough, the real danger is to miss an obstacle on the road, or to predict a curve badly. On the other hand, if your lights are too strong, you risk dazzling the people in front of you, and thus putting yourself at risk. It is consequently essential for others as well as for you to have an optimal setting of your parking lights.
Setting the low beam headlights of an Cadillac CTS for legal motives
Additionally to safety, there is a law that regulates the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at minimum , 30 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Cadillac CTS?
We will now go forward to the part that concerns you the most in this article content, how to adjust the low beams of his Cadillac CTS? This setting may sound a bit complex, but if you follow the recommendations you should be able to do it without too much issue.
Preparations to set the low beam of a Cadillac CTS
First of all, you will need to prepare your motor vehicle to adjust your low beam lights in good conditions, here are the preparations to apply:
- Place your motor vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Examine your tire pressure carefully.
- Examine that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the motor vehicle, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Cadillac CTS
Once your motor vehicle is set up, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then back your motor vehicle up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to follow:
- Open your bonnet, situate the screws for horizontal and vertical adjustment of the lights of your Cadillac CTS (they are usually marked, and those above must adjust the verticality and those on the side controls the horizontality of the adjustment).
- Use a cloth or anything else to hide the light on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most powerful part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once carried out, verify that the low beam setting of your Cadillac CTS is consistent on the road, do not hesitate to verify that it has been driven, on occasion it may move.
.
If you want to adjust the fog lights on your Cadillac CTS, please browse our article content on this subject.
To discover more tips on the Cadillac CTS, take a look at the Cadillac CTS category.
