Whether you feel you can’t see good enough at night, regardless you feel you’re lighting too low or too high, in all of these cases, there’s only one component of your motor vehicle to blame – your low beams. Despite the fact this adjustment may look simple thanks to the thumbwheel on your dashboard, a full adjustment is much more complicated than this common modification, and in this document, we will see how to adjust the low beam lights of your Toyota C HR? For this, first we will see why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Toyota C HR.
Why adjust the low beam lights of your Toyota C HR?
So let’s begin our document with the interest of adjusting the low beam lights of your Toyota C HR. For many of us these lights are good enough adjusted, and it looks like that they light up enough at night. Sadly this is not always the case and checking out this setting, either because the low beams of your Toyota C HR are not lighting up well, or because you have the sense that they are too low or too strong is a good plan .
Adjusting the low beam of your Toyota C HR for safety is a good plan.
First of all, the adjusting of the dipped headlights of an Toyota C HR must be done for a elementary safety reason. Regardless it’s for you, or for the other users you encounter during your night journeys. In fact, if you don’t see enough, the real danger is to fail to see an obstacle on the route, or to anticipate a curve badly. However, if your lights are too strong, you risk dazzling the drivers in front of you, and thus putting yourself at risk. It is as a consequence necessary for others as well as for you to have an optimal setting of your parking lights.
Setting the low beam headlights of an Toyota C HR for legal motives
Additionally to safety, there is a law that regulates the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at minimum , 30 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Toyota C HR?
We will now move on to the part that concerns you the more in this document, how to adjust the low beams of his Toyota C HR? This setting may seem to be a bit complex, but if you stick to the recommendations you should be able to do it without too much difficulty.
Preparations to set the low beam of a Toyota C HR
To start, you will need to set up your motor vehicle to adjust your low beam lights in good conditions, here are the preparations to put in place:
- Place your motor vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Examine your tire pressure cautiously.
- Examine that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the motor vehicle, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Toyota C HR
Once your motor vehicle is into position, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then back your motor vehicle up to a distance of between 7 and 10 metres. For the rest of the operation here are the guidelines to stick to:
- Open your bonnet, situate the screws for horizontal and vertical adjustment of the lights of your Toyota C HR (they are in general marked, and those above must adjust the verticality and those on the side controls the horizontality of the adjustment).
- Use a cloth or anything else to hide the light on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most strong part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once completed, examine that the low beam setting of your Toyota C HR is consistent on the road, do not hesitate to examine that it has been driven, sometimes it may move.
.
If you want to adjust the fog lights on your Toyota C HR, please browse our document on this subject.
To discover more tips on the Toyota C HR, take a look at the Toyota C HR category.
