When your car is running normally everything is fine, nevertheless if it starts to have frequent problems you might start to question, specifically if your car won’t start. In this article we will teach you where the starter of a Toyota C HR is, it will help you to resolve your ignition problems. To do this, we will first explain the role of a starter, then, where is the starter on a Toyota C HR , and, finally, how to change the starter of a car.

find-starter-toyota-c-hr

Role of the starter on your Toyota C HR

We start this content by explaining the role of the starter motor on your Toyota C HR. The starter is an electric motor which is powered by your battery, its job will be to make your engine run at a high enough speed to start it (usually around 300/400 rpm). It is composed of three main parts:

  • The Solenoid: This part is an electrical relay that will action as a switch, it will be activated by the key of your Toyota C HR and let the current from your battery to the engine unit of your alternator.

    • The engine unit: Most important element of your alternator, it is the one that will drive the flywheel of your Toyota C HR and create enough speed for your engine unit to start.

  • The engagement pinion: This is the last part of your starter, it is the toothed wheel that will be in direct contact with the flywheel, it allows to send the force from the starter to the engine.

Where is the starter on a Toyota C HR?

Now that we have fairly quickly detailed what a starter is and how it functions, we will answer the question that most of you have to ask yourselves where is the starter based on a Toyota C HR? It is quite easy to find a starter, in fact, it is a large part that will almost always be positioned in a similar location. We let you see the two possible spots for your car starter below.

Location of the starter on traditional Toyota C HR

First and most common case, where to find the starter of a Toyota C HR with a conventional motor (implied without start and stop). The starter has a particular function, to start the engine unit of your car, for that, it must always be near the engine unit flywheel of this one because it is the part that it actuates when it is used. The flywheel is based at the junction between your gearbox and your engine unit.

Location of the starter to Toyota C HR with start and stop

And now second possible starter location of your Toyota C HR . This case is much less frequent. It only relates to engines built with start and stop, and a good part of them will be equipped with a starter positioned close to the flywheel. However, on some particular series or engines, the starter of your Toyota C HR may be included in your alternator, it is then named a starter-alternator, to find it nothing less difficult, locate your accessory belt and you should see the big starter block.

How to change the starter on a Toyota C HR?

Finally, we’ll show you to you actually quite fairly quickly how to change the starter of a Toyota C HR. This procedure is not actually complex, it can be considered by people who have a minimal of basic mechanical expertise and adapted tools. Follow below the main steps to perform this intervention:

  • Disconnect the battery on your Toyota C HR, if you don’t know how to do it, don’t think twice to consult our content which details how to do it without taking any risk.
  • After locating your starter, loosen the fasteners that hold it in your engine unit block, there will in most cases be 2 or 3

    • .

  • It will be time to disconnect the power cables from the starter motor of your Toyota C HR, nevertheless before doing so we advise you to take a picture of the set up to avoid making a mistake when reassembling.
  • It’s possible that to remove it you might need to remove parts like the gimbal.
  • Remount the new starter, being careful when connecting the connectors.
  • Reconnect your battery and test your starter.

If you have any additional questions about the Toyota C HR, do not hesitate to consult our Toyota C HR category.