Whether you feel you can’t see as well after dark, regardless whether you feel you’re lighting too low or too high, in all of these circumstances, there’s only one component of your motor vehicle to blame – your low beams. Even though this adjustment may appear simple thanks to the thumbwheel on your dashboard, a whole adjustment is much more complicated than this basic realignment, and in this article, we will see how to adjust the low beam lights of your Toyota Avensis? For this, first we will see why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Toyota Avensis.
Why adjust the low beam lights of your Toyota Avensis?
So let’s start our article with the interest of adjusting the low beam lights of your Toyota Avensis. For a lot of people these lights are sufficiently adjusted, and it looks like that they light up enough at night. Unfortunately this is not always the case and checking this setting, either because the low beams of your Toyota Avensis are not lighting up well, or because you have the sense that they are too low or too powerful is a good plan .
Adjusting the low beam of your Toyota Avensis for safety is a good plan.
To start, the adjusting of the dipped headlights of an Toyota Avensis must be done for a elementary safety cause. Regardless it’s for you, or for the other drivers you come across during your night trips. Indeed, if you don’t see enough, the real danger is to miss an obstacle on the route, or to predict a curve badly. On the contrary, if your lights are too powerful, you risk dazzling the people in front of you, and thus putting yourself at risk. It is as a consequence fundamental for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Toyota Avensis for legal justifications
Additionally to safety, there is a law that controls the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at minimum , 30 meters. Another regulation controls their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Toyota Avensis?
We will now move on to the section that concerns you the more in this article, how to adjust the low beams of his Toyota Avensis? This setting may appear to be a bit complicated, but if you follow the recommendations you should be able to do it without too much issue.
Preparations to set the low beam of a Toyota Avensis
To start, you will need to set up your motor vehicle to adjust your low beam lights in good conditions, here are the preparations to do:
- Place your motor vehicle on a floor in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure rigorously.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the motor vehicle, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Toyota Avensis
Once your motor vehicle is into position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then back your motor vehicle up to a distance of between 7 and 10 metres. For the rest of the task here are the basic steps to follow:
- Open your bonnet, situate the screws for horizontal and vertical adjustment of the lights of your Toyota Avensis (they are usually marked, and those above must adjust the verticality and those on the side handles the horizontality of the adjustment).
- Use a cloth or some thing else to hide the light on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most strong part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once carried out, verify that the low beam setting of your Toyota Avensis is consistent on the road, do not hesitate to verify that it has been driven, on occasion it may move.
.
If you want to adjust the fog lights on your Toyota Avensis, please browse our article on this subject.
In the event that you have any further questions about the Toyota Avensis, do not hesitate to consult our Toyota Avensis category.
