Regardless you feel you can’t see good enough at night, whether you feel you’re lighting too low or too high, in all of these situations, there’s only one component of your car to blame – your low beams. Even though this adjustment may appear simple thanks to the thumbwheel on your dashboard, a full adjustment is much more complex than this ordinary modification, and in this content, we will discover how to adjust the low beam lights of your Renault Talisman? For this, first of all we will discover why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Renault Talisman.
Why adjust the low beam lights of your Renault Talisman?
So let’s start our content with the advantage of adjusting the low beam lights of your Renault Talisman. For a lot of people these lights are sufficiently adjusted, and it seems that they light up enough at night. Sadly this is not automatically the case and examining this setting, either because the low beams of your Renault Talisman are not illuminating well, or because you have the feeling that they are too weak or too strong is a wise decision .
Adjusting the low beam of your Renault Talisman for safety is a wise decision.
First of all, the adjusting of the dipped headlights of an Renault Talisman must be done for a ordinary safety purpose. It doesn’t matter if it’s for you, or for the other users you come across during your night trips. In fact, if you don’t see enough, the real danger is to miss an obstacle on the route, or to anticipate a curve badly. On the contrary, if your lights are too strong, you risk dazzling the drivers in front of you, and thus putting yourself at risk. It is as a consequence essential for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Renault Talisman for legal justifications
Moreover to safety, there is a law that controls the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at minimum , 30 meters. Another regulation controls their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Renault Talisman?
We will now move on to the section that interests you the more in this content, how to adjust the low beams of his Renault Talisman? This setting may sound a bit difficult, but if you stick to the guidelines you should be able to do it without too much difficulty.
Preparations to set the low beam of a Renault Talisman
First of all, you will need to set up your car to adjust your low beam lights in good conditions, here are the preparations to apply:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure rigorously.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unnecessary weight from the car, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Renault Talisman
Once your car is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then move back your car up to a distance of between 7 and 10 metres. For the rest of the task here are the steps to stick to:
- Open your bonnet, situate the screws for horizontal and vertical adjustment of the lights of your Renault Talisman (they are commonly marked, and those above must adjust the verticality and those on the side manages the horizontality of the adjustment).
- Use a cloth or something else to hide the light on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most powerful part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical manipulation, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once complete, verify that the low beam setting of your Renault Talisman is consistent on the road, do not be reluctant to verify that it has been driven, sometimes it may move.
.
If you want to adjust the fog lights on your Renault Talisman, please read our content on this subject.
In the event that you have any further questions about the Renault Talisman, do not hesitate to consult our Renault Talisman category.
