Regardless you feel you can’t see as well after dark, regardless whether you feel you’re lighting too low or too high, in all of these cases, there’s only one component of your vehicle to blame – your low beams. Although this correction may seem simple thanks to the thumbwheel on your dashboard, a whole correction is much more complicated than this common manipulation, and in this article content, we will see how to adjust the low beam lights of your Renault Latitude? For this, first of all we will see why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Renault Latitude.
Why set the low beam lights of your Renault Latitude?
So let’s begin our article content with the benefit of adjusting the low beam lights of your Renault Latitude. For many people these lights are well enough adjusted, and it seems that they light up enough at night. Unfortunately this is not necessarily the case and examining this setting, either because the low beams of your Renault Latitude are not illuminating well, or because you have the sense that they are too low or too strong is a good plan .
Adjusting the low beam of your Renault Latitude for safety is a good plan.
To start, the adjusting of the dipped headlights of an Renault Latitude must be done for a ordinary safety cause. Regardless it’s for you, or for the other users you encounter during your night journeys. In reality, if you don’t see enough, the risk is to fail to see an obstacle on the route, or to predict a curve badly. Alternatively, if your lights are too strong, you risk dazzling the people in front of you, and thus putting yourself at risk. It is therefore imperative for others as well as for you to have an optimal setting of your parking lights.
Setting the low beam headlights of an Renault Latitude for legal motives
Additionally to safety, there is a law that regulates the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at minimum , 30 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Renault Latitude?
We will now go forward to the section that interests you the most in this article content, how to adjust the low beams of his Renault Latitude? This setting may seem to be a bit complex, but if you stick to the instructions you should be able to do it without too much difficulty.
Preparations to set the low beam of a Renault Latitude
To start, you will need to prepare your vehicle to adjust your low beam lights in good conditions, here are the preparations to apply:
- Place your vehicle on a floor in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure precisely.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unnecessary weight from the vehicle, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Renault Latitude
Once your vehicle is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then step back your vehicle up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to stick to:
- Open your bonnet, situate the screws for horizontal and vertical adjustment of the lights of your Renault Latitude (they are commonly marked, and those above must adjust the verticality and those on the side manages the horizontality of the adjustment).
- Use a cloth or anything else to hide the light on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical manipulation, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once done, verify that the low beam setting of your Renault Latitude is consistent on the road, do not be reluctant to verify that it has been driven, in some cases it may move.
.
If you want to adjust the fog lights on your Renault Latitude, please examine our article content on this subject.
If you want more guides on the Renault Latitude, go to our Renault Latitude category.
