Regardless whether you feel you can’t see properly during the night, whether you feel you’re lighting too low or too high, in all of these occasions, there’s only one component of your vehicle to blame – your low beams. Although this correction may appear easy to do thanks to the thumbwheel on your dashboard, a complete correction is much more complicated than this basic manipulation, and in this article content, we will see how to adjust the low beam lights of your PORSCHE BOXSTER? For this, first of all we will see why you should adjust your lights, and, secondly, how to adjust the low beam lights of your PORSCHE BOXSTER.
Why set the low beam lights of your PORSCHE BOXSTER?
So let’s commence our article content with the interest of adjusting the low beam lights of your PORSCHE BOXSTER. For many of us these lights are well enough adjusted, and it seems that they light up enough at night. Sadly this is not automatically the case and verifying this setting, either because the low beams of your PORSCHE BOXSTER are not illuminating well, or because you have the sense that they are too low or too powerful is a good plan .
Adjusting the low beam of your PORSCHE BOXSTER for safety is a good plan.
First of all, the adjusting of the dipped headlights of an PORSCHE BOXSTER must be done for a ordinary safety purpose. Regardless it’s for you, or for the other drivers you encounter during your night trips. In reality, if you don’t see enough, the risk is to miss an obstacle on the route, or to anticipate a curve badly. On the other hand, if your lights are too powerful, you risk dazzling the people in front of you, and thus putting yourself in danger. It is therefore fundamental for others as well as for you to have an optimal setting of your parking lights.
Setting the low beam headlights of an PORSCHE BOXSTER for legal reasons
Additionally to safety, there is a law that regulates the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at minimum , 30 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a PORSCHE BOXSTER?
We will now go forward to the section that concerns you the more in this article content, how to adjust the low beams of his PORSCHE BOXSTER? This setting may appear a bit complicated, but if you stick to the recommendations you should be able to do it without too much difficulty.
Preparations to set the low beam of a PORSCHE BOXSTER
To start, you will need to set up your vehicle to adjust your low beam lights in good conditions, here are the preparations to apply:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure rigorously.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unnecessary weight from the vehicle, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his PORSCHE BOXSTER
Once your vehicle is set up, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then step back your vehicle up to a distance of between 7 and 10 metres. For the rest of the process here are the guidelines to stick to:
- Open your bonnet, situate the screws for horizontal and vertical adjustment of the lights of your PORSCHE BOXSTER (they are commonly marked, and those above must adjust the verticality and those on the side manages the horizontality of the adjustment).
- Use a cloth or something else to hide the light on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most strong part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once completed, check that the low beam setting of your PORSCHE BOXSTER is consistent on the road, do not hesitate to check that it has been driven, in some cases it may move.
.
If you want to adjust the fog lights on your PORSCHE BOXSTER, please read our article content on this subject.
In the event that you have any further questions about the PORSCHE BOXSTER, do not hesitate to consult our PORSCHE BOXSTER category.
