Regardless whether you feel you can’t see properly during the night, whether you feel you’re lighting too low or too high, in all of these circumstances, there’s only one part of your car to blame – your low beams. Although this adjustment may look simple thanks to the thumbwheel on your dashboard, a complete adjustment is much more complicated than this common manipulation, and in this article content, we will find out how to adjust the low beam lights of your Peugeot Partner Tepee? For this, first we will find out why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Peugeot Partner Tepee.
Why adjust the low beam lights of your Peugeot Partner Tepee?
So let’s start our article content with the advantage of adjusting the low beam lights of your Peugeot Partner Tepee. For most of us these lights are good enough adjusted, and it seems that they light up enough at night. However this is not constantly the case and checking this setting, either because the low beams of your Peugeot Partner Tepee are not illuminating well, or because you have the feeling that they are too low or too powerful is a good idea .
Adjusting the low beam of your Peugeot Partner Tepee for security is a good idea.
First of all, the adjusting of the dipped headlights of an Peugeot Partner Tepee must be done for a ordinary security purpose. It doesn’t matter if it’s for you, or for the other users you come across during your night trips. In fact, if you don’t see enough, the risk is to fail to see an obstacle on the route, or to predict a curve badly. However, if your lights are too powerful, you risk dazzling the car owners in front of you, and thus putting yourself in danger. It is consequently crucial for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Peugeot Partner Tepee for legal justifications
In addition to security, there is a law that regulates the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at minimum , 30 meters. Another regulation regulates their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Peugeot Partner Tepee?
We will now go forward to the section that concerns you the most in this article content, how to adjust the low beams of his Peugeot Partner Tepee? This setting may appear a bit complex, but if you stick to the recommendations you should be able to do it without too much difficulty.
Preparations to set the low beam of a Peugeot Partner Tepee
To start, you will need to prepare your car to adjust your low beam lights in good conditions, here are the preparations to do:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure rigorously.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the car, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Peugeot Partner Tepee
Once your car is set up, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then move back your car up to a distance of between 7 and 10 metres. For the rest of the procedure here are the guidelines to stick to:
- Open your bonnet, situate the screws for horizontal and vertical adjustment of the lights of your Peugeot Partner Tepee (they are commonly marked, and those above must adjust the verticality and those on the side manages the horizontality of the adjustment).
- Use a cloth or anything else to hide the light on which you are not making the manipulation.
- Using the screws to make the horizontal manipulation, you should have the most powerful part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, examine that the low beam setting of your Peugeot Partner Tepee is consistent on the road, do not hesitate to examine that it has been driven, sometimes it may move.
.
If you want to adjust the fog lights on your Peugeot Partner Tepee, please browse our article content on this subject.
To discover more tips on the Peugeot Partner Tepee, take a look at the Peugeot Partner Tepee category.
