Whether you feel you can’t see good enough through the night, regardless you feel you’re lighting too low or too high, in all of these occasions, there’s only one component of your car to blame – your low beams. Despite the fact this correction may seem easy thanks to the thumbwheel on your dashboard, a full correction is much more technical than this basic realignment, and in this content, we will discover how to adjust the low beam lights of your Tesla Model Y? For this, first we will discover why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Tesla Model Y.
Why set the low beam lights of your Tesla Model Y?
So let’s start our content with the point of adjusting the low beam lights of your Tesla Model Y. For the majority of us these lights are sufficiently adjusted, and it seems that they light up enough at night. However this is not automatically the case and examining this setting, either because the low beams of your Tesla Model Y are not lighting up well, or because you have the sense that they are too weak or too powerful is a wise decision .
Adjusting the low beam of your Tesla Model Y for security is a wise decision.
To begin, the adjusting of the dipped headlights of an Tesla Model Y must be done for a simple security purpose. Regardless it’s for you, or for the other users you come across during your night journeys. In reality, if you don’t see enough, the risk is to fail to see an obstacle on the route, or to predict a curve badly. Alternatively, if your lights are too powerful, you risk dazzling the drivers in front of you, and thus putting yourself at risk. It is subsequently essential for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Tesla Model Y for law justifications
In addition to security, there is a law that supervises the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at minimum , 30 meters. Another law supervises their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Tesla Model Y?
We will now move on to the section that concerns you the more in this content, how to adjust the low beams of his Tesla Model Y? This setting may appear a bit complicated, but if you stick to the guidelines you should be able to do it without too much problem.
Preparations to set the low beam of a Tesla Model Y
First of all, you will need to prepare your car to adjust your low beam lights in good conditions, here are the preparations to do:
- Place your car on a floor in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure rigorously.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the car, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Tesla Model Y
Once your car is into position, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then step back your car up to a distance of between 7 and 10 metres. For the rest of the task here are the basic steps to stick to:
- Open your bonnet, situate the screws for horizontal and vertical adjustment of the lights of your Tesla Model Y (they are usually marked, and those above must adjust the verticality and those on the side manages the horizontality of the adjustment).
- Use a cloth or anything else to hide the light on which you are not making the manipulation.
- Using the screws to make the horizontal manipulation, you should have the most strong part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once done, check that the low beam setting of your Tesla Model Y is consistent on the road, do not hesitate to check that it has been driven, sometimes it may move.
.
If you want to adjust the fog lights on your Tesla Model Y, please browse our content on this subject.
If you need more tutorials on the Tesla Model Y, go to our Tesla Model Y category.
