Whether you feel you can’t see as well after dark, regardless whether you feel you’re lighting too low or too high, in all of these cases, there’s only one part of your car to blame – your low beams. Even though this adjustment may seem easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more complex than this basic realignment, and in this article, we will see how to adjust the low beam lights of your Peugeot 5008? For this, first we will see why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Peugeot 5008.
Why set the low beam lights of your Peugeot 5008?
So let’s commence our article with the point of adjusting the low beam lights of your Peugeot 5008. For most people these lights are well enough adjusted, and it seems that they light up enough at night. Unfortunately this is not always the case and examining this setting, either because the low beams of your Peugeot 5008 are not illuminating well, or because you have the sense that they are too low or too strong is a wise decision .
Adjusting the low beam of your Peugeot 5008 for safety is a wise decision.
Firstly, the adjusting of the dipped headlights of an Peugeot 5008 must be done for a ordinary safety purpose. Whether it’s for you, or for the other drivers you encounter during your night trips. In fact, if you don’t see enough, the real danger is to fail to see an obstacle on the route, or to predict a curve badly. On the contrary, if your lights are too strong, you risk dazzling the drivers in front of you, and thus putting yourself in danger. It is therefore important for others as well as for you to have an optimal setting of your parking lights.
Setting the low beam headlights of an Peugeot 5008 for legal motives
In addition to safety, there is a law that controls the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at minimum , 30 meters. Another legislation controls their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Peugeot 5008?
We will now go forward to the part that concerns you the more in this article, how to adjust the low beams of his Peugeot 5008? This setting may seem a bit complex, but if you follow the recommendations you should be able to do it without too much issue.
Preparations to set the low beam of a Peugeot 5008
Firstly, you will need to set up your car to adjust your low beam lights in good conditions, here are the preparations to do:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure carefully.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the car, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Peugeot 5008
Once your car is set up, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then back your car up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to follow:
- Open your bonnet, situate the screws for horizontal and vertical adjustment of the lights of your Peugeot 5008 (they are usually marked, and those above must adjust the verticality and those on the side handles the horizontality of the adjustment).
- Use a cloth or anything else to hide the light on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once carried out, verify that the low beam setting of your Peugeot 5008 is consistent on the road, do not hesitate to verify that it has been driven, sometimes it may move.
.
If you want to adjust the fog lights on your Peugeot 5008, please read our article on this subject.
To discover more tips on the Peugeot 5008, take a look at the Peugeot 5008 category.
