It doesn’t matter if you feel you can’t see good enough at night, regardless you feel you’re lighting too low or too high, in all of these cases, there’s only one component of your motor vehicle to blame – your low beams. Even though this adjustment may seem to be easy to do thanks to the thumbwheel on your dashboard, a full adjustment is much more complicated than this ordinary modification, and in this document, we will find out how to adjust the low beam lights of your Peugeot 407? For this, first of all we will find out why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Peugeot 407.
Why adjust the low beam lights of your Peugeot 407?
So let’s begin our document with the point of adjusting the low beam lights of your Peugeot 407. For the majority of us these lights are sufficiently adjusted, and it looks like that they light up enough at night. However this is not always the case and checking this setting, either because the low beams of your Peugeot 407 are not lighting up well, or because you have the sense that they are too low or too powerful is a wise decision .
Adjusting the low beam of your Peugeot 407 for safety is a wise decision.
First of all, the adjusting of the dipped headlights of an Peugeot 407 must be done for a elementary safety reason. Whether it’s for you, or for the other users you come across during your night journeys. In fact, if you don’t see enough, the risk is to miss an obstacle on the road, or to anticipate a curve badly. Alternatively, if your lights are too powerful, you risk dazzling the drivers in front of you, and thus putting yourself at risk. It is as a consequence crucial for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Peugeot 407 for legal motives
Moreover to safety, there is a law that supervises the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at least 30 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Peugeot 407?
We will now go forward to the section that concerns you the most in this document, how to adjust the low beams of his Peugeot 407? This setting may appear to be a bit complicated, but if you follow the guidelines you should be able to do it without too much problem.
Preparations to set the low beam of a Peugeot 407
Firstly, you will need to set up your motor vehicle to adjust your low beam lights in good conditions, here are the preparations to do:
- Place your motor vehicle on a area in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure rigorously.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unnecessary weight from the motor vehicle, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Peugeot 407
Once your motor vehicle is into position, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then back your motor vehicle up to a distance of between 7 and 10 metres. For the rest of the operation here are the basic steps to follow:
- Open your bonnet, identify the screws for horizontal and vertical adjustment of the lights of your Peugeot 407 (they are usually marked, and those above must adjust the verticality and those on the side adjusts the horizontality of the adjustment).
- Use a cloth or anything else to hide the light on which you are not making the manipulation.
- Using the screws to make the horizontal manipulation, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once accomplished, examine that the low beam setting of your Peugeot 407 is consistent on the road, do not hesitate to examine that it has been driven, in some cases it may move.
.
If you want to adjust the fog lights on your Peugeot 407, please read our document on this subject.
To discover more tips on the Peugeot 407, take a look at the Peugeot 407 category.
