Regardless you feel you can’t see as well at night, regardless whether you feel you’re lighting too low or too high, in all of these cases, there’s only one component of your vehicle to blame – your low beams. Although this adjustment may seem to be simple thanks to the thumbwheel on your dashboard, a complete adjustment is much more complicated than this ordinary manipulation, and in this document, we will find out how to adjust the low beam lights of your Peugeot 406? For this, first of all we will find out why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Peugeot 406.
Why adjust the low beam lights of your Peugeot 406?
So let’s start our document with the benefit of adjusting the low beam lights of your Peugeot 406. For many people these lights are good enough adjusted, and it seems that they light up enough at night. Unfortunately this is not necessarily the case and examining this setting, either because the low beams of your Peugeot 406 are not illuminating well, or because you have the sense that they are too low or too strong is a wise decision .
Adjusting the low beam of your Peugeot 406 for safety is a wise decision.
Firstly, the adjusting of the dipped headlights of an Peugeot 406 must be done for a ordinary safety cause. Regardless it’s for you, or for the other users you come across during your night trips. In reality, if you don’t see enough, the real danger is to fail to see an obstacle on the road, or to predict a curve badly. On the flip side, if your lights are too strong, you risk dazzling the drivers in front of you, and thus putting yourself in danger. It is as a consequence fundamental for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Peugeot 406 for legal motives
Furthermore to safety, there is a law that supervises the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at minimum , 30 meters. Another regulation supervises their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Peugeot 406?
We will now go forward to the part that interests you the more in this document, how to adjust the low beams of his Peugeot 406? This setting may appear to be a bit complicated, but if you follow the instructions you should be able to do it without too much difficulty.
Preparations to set the low beam of a Peugeot 406
Firstly, you will need to set up your vehicle to adjust your low beam lights in good conditions, here are the preparations to apply:
- Place your vehicle on a floor in front of a white wall for example, about 4 or 5 meters from the wall.
- Examine your tire pressure precisely.
- Examine that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unnecessary weight from the vehicle, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Peugeot 406
Once your vehicle is set up, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then move back your vehicle up to a distance of between 7 and 10 metres. For the rest of the operation here are the steps to follow:
- Open your bonnet, situate the screws for horizontal and vertical adjustment of the lights of your Peugeot 406 (they are usually marked, and those above must adjust the verticality and those on the side adjusts the horizontality of the adjustment).
- Use a cloth or anything else to hide the light on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, examine that the low beam setting of your Peugeot 406 is consistent on the road, do not hesitate to examine that it has been driven, sometimes it may move.
.
If you want to adjust the fog lights on your Peugeot 406, please read our document on this subject.
To discover more tips on the Peugeot 406, take a look at the Peugeot 406 category.
