Whether you feel you can’t see good enough after dark, whether you feel you’re lighting too low or too high, in all of these situations, there’s only one part of your car to blame – your low beams. Even though this adjustment may look simple thanks to the thumbwheel on your dashboard, a complete adjustment is much more technical than this common modification, and in this content, we will see how to adjust the low beam lights of your Peugeot 206 ? For this, first we will see why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Peugeot 206 .
Why adjust the low beam lights of your Peugeot 206 ?
So let’s begin our content with the point of adjusting the low beam lights of your Peugeot 206 . For a lot of people these lights are sufficiently adjusted, and it looks like that they light up enough at night. Sadly this is not necessarily the case and looking at this setting, either because the low beams of your Peugeot 206 are not illuminating well, or because you have the feeling that they are too weak or too powerful is a good option .
Adjusting the low beam of your Peugeot 206 for security is a good option.
To start, the adjusting of the dipped headlights of an Peugeot 206 must be done for a basic security cause. It doesn’t matter if it’s for you, or for the other users you encounter during your night journeys. In reality, if you don’t see enough, the risk is to miss an obstacle on the road, or to anticipate a curve badly. On the flip side, if your lights are too powerful, you risk dazzling the drivers in front of you, and thus putting yourself in danger. It is subsequently fundamental for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Peugeot 206 for law motives
Furthermore to security, there is a law that controls the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at minimum , 30 meters. Another legislation controls their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Peugeot 206 ?
We will now go forward to the section that concerns you the most in this content, how to adjust the low beams of his Peugeot 206 ? This setting may appear to be a bit complex, but if you follow the recommendations you should be able to do it without too much difficulty.
Preparations to set the low beam of a Peugeot 206
Firstly, you will need to set up your car to adjust your low beam lights in good conditions, here are the preparations to apply:
- Place your car on a floor in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure cautiously.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unnecessary weight from the car, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Peugeot 206
Once your car is set up, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then move back your car up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to follow:
- Open your bonnet, locate the screws for horizontal and vertical adjustment of the lights of your Peugeot 206 (they are generally marked, and those above must adjust the verticality and those on the side handles the horizontality of the adjustment).
- Use a cloth or anything else to hide the light on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once carried out, verify that the low beam setting of your Peugeot 206 is consistent on the road, do not hesitate to verify that it has been driven, in some cases it may move.
.
If you want to adjust the fog lights on your Peugeot 206 , please go through our content on this subject.
To find more tips on the Peugeot 206 , take a look at the Peugeot 206 category.
