Regardless whether you feel you can’t see as well after dark, whether you feel you’re lighting too low or too high, in all of these situations, there’s only one component of your car to blame – your low beams. Although this correction may seem to be simple thanks to the thumbwheel on your dashboard, a complete correction is much more technical than this common manipulation, and in this document, we will discover how to adjust the low beam lights of your Nissan Titan? For this, first we will discover why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Nissan Titan.
Why adjust the low beam lights of your Nissan Titan?
So let’s start our document with the point of adjusting the low beam lights of your Nissan Titan. For many people these lights are well enough adjusted, and it looks like that they light up enough at night. Sadly this is not automatically the case and checking out this setting, either because the low beams of your Nissan Titan are not illuminating well, or because you have the sense that they are too weak or too strong is a good option .
Adjusting the low beam of your Nissan Titan for safety is a good option.
To begin, the adjusting of the dipped headlights of an Nissan Titan must be done for a elementary safety reason. Regardless whether it’s for you, or for the other users you come across during your night journeys. In fact, if you don’t see enough, the risk is to miss an obstacle on the route, or to anticipate a curve badly. On the contrary, if your lights are too strong, you risk dazzling the drivers in front of you, and thus putting yourself in danger. It is consequently fundamental for others as well as for you to have an optimal setting of your parking lights.
Setting the low beam headlights of an Nissan Titan for law reasons
Moreover to safety, there is a law that regulates the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at minimum , 30 meters. Another regulation regulates their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Nissan Titan?
We will now move on to the section that interests you the more in this document, how to adjust the low beams of his Nissan Titan? This setting may appear a bit complex, but if you stick to the recommendations you should be able to do it without too much problem.
Preparations to set the low beam of a Nissan Titan
Firstly, you will need to prepare your car to adjust your low beam lights in good conditions, here are the preparations to do:
- Place your car on a area in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure cautiously.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the car, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Nissan Titan
Once your car is in position, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then move back your car up to a distance of between 7 and 10 metres. For the rest of the procedure here are the simple steps to stick to:
- Open your bonnet, situate the screws for horizontal and vertical adjustment of the lights of your Nissan Titan (they are almost always marked, and those above must adjust the verticality and those on the side manages the horizontality of the adjustment).
- Use a cloth or some thing else to hide the light on which you are not making the manipulation.
- Using the screws to make the horizontal manipulation, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once complete, examine that the low beam setting of your Nissan Titan is consistent on the road, do not hesitate to examine that it has been driven, sometimes it may move.
.
If you want to adjust the fog lights on your Nissan Titan, please examine our document on this subject.
If you want more guides on the Nissan Titan, go to our Nissan Titan category.
