It doesn’t matter if you feel you can’t see properly through the night, whether you feel you’re lighting too low or too high, in all of these cases, there’s only one component of your vehicle to blame – your low beams. Even though this adjustment may appear simple thanks to the thumbwheel on your dashboard, a full adjustment is much more complicated than this ordinary realignment, and in this content, we will find out how to adjust the low beam lights of your Mercedes Classe V? For this, first of all we will find out why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Mercedes Classe V.
Why adjust the low beam lights of your Mercedes Classe V?
So let’s begin our content with the interest of adjusting the low beam lights of your Mercedes Classe V. For most of us these lights are sufficiently adjusted, and it seems that they light up enough at night. Unfortunately this is not constantly the case and checking out this setting, either because the low beams of your Mercedes Classe V are not lighting up well, or because you have the sense that they are too low or too powerful is a good plan .
Adjusting the low beam of your Mercedes Classe V for safety is a good plan.
First of all, the adjusting of the dipped headlights of an Mercedes Classe V must be done for a ordinary safety purpose. Regardless it’s for you, or for the other users you come across during your night journeys. Indeed, if you don’t see enough, the real danger is to fail to see an obstacle on the road, or to predict a curve badly. However, if your lights are too powerful, you risk dazzling the drivers in front of you, and thus putting yourself at risk. It is therefore fundamental for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Mercedes Classe V for law justifications
In addition to safety, there is a law that regulates the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at minimum , 30 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Mercedes Classe V?
We will now move on to the section that interests you the most in this content, how to adjust the low beams of his Mercedes Classe V? This setting may sound a bit difficult, but if you stick to the recommendations you should be able to do it without too much difficulty.
Preparations to set the low beam of a Mercedes Classe V
To start, you will need to prepare your vehicle to adjust your low beam lights in good conditions, here are the preparations to do:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure precisely.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the vehicle, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Mercedes Classe V
Once your vehicle is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then move back your vehicle up to a distance of between 7 and 10 metres. For the rest of the procedure here are the simple steps to stick to:
- Open your bonnet, identify the screws for horizontal and vertical adjustment of the lights of your Mercedes Classe V (they are in most cases marked, and those above must adjust the verticality and those on the side handles the horizontality of the adjustment).
- Use a cloth or anything else to hide the light on which you are not making the manipulation.
- Using the screws to make the horizontal manipulation, you should have the most powerful part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once completed, verify that the low beam setting of your Mercedes Classe V is consistent on the road, do not hesitate to verify that it has been driven, in some cases it may move.
.
If you want to adjust the fog lights on your Mercedes Classe V, please go through our content on this subject.
Whenever you have any further questions about the Mercedes Classe V, do not hesitate to consult our Mercedes Classe V category.
