Regardless whether it’s for your personal safety, for roadworthiness tests or to avoid a fine, ensuring your headlamp bulbs are in every case working is necessary. In fact, bulbs are wearing units that will inevitably burn out over the years and as a consequence need to be changed. You’re perhaps on this site because one of your parking lights is burnt out and you’re struggling with how to change your Mercedes Classe V’s license plate bulb, we’ve made this content page to help you do it without any help and not have to go to your auto technician. Firstly, we will examine changing the license plate bulb from the outside, secondly, how to change the license plate bulb without outside access, and thirdly, how to change the rear license plate bulb of your Mercedes Classe V.
How to replace the license plate bulb on your Mercedes Classe V throughout the outside
This technique is the fastest of the two, in truth, for this one you will just have to take out the protective covers of the bulbs. Sadly on some years or packages of car these covers do not open from the outside and if this is the case we will dedicate some time on in the second part of this document to explain the way.
So let’s begin with changing the number plate bulb by going through the outside of your Mercedes Classe V. Regardless whether it’s the front or the back of your vehicle the operation will be similar.
Here are a few simple guidelines to follow to perform this maintenance tasks:
- With the engine off, unplug the battery terminals from your car
- Position yourself in front of your license plate and use a flat screwdriver or knife to place the flat part into the notch assigned for this goal (generally on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Mercedes Classe V
- Use your screwdriver or knife to remove the bulb from its placement, if you are worried of destroying something, you can also do it with your fingers.
- Finally, put the new license plate light bulb
- Last stage, before reassembling, reconnect your battery and verify the light to validate the successfulness of the procedure.
.
How to change the number plate bulb on your Mercedes Classe V without outside access
Second part of our document, replace this license plate bulb on your Mercedes Classe V without external access. Generally you will be able to access it, nevertheless some series (often at the rear does not allow this access).
How to replace the front license plate bulb on my Mercedes Classe V
To replace the one on the front plate, nothing could be less hard, you will have to put yourself under the vehicle (preferably positioned on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, generally held by two soft plastic tabs by pressing on both simultaneously, then right after you have your license plate bulb block in hand, Take off the plastic that acts as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (take extra care not to apply too much force or you will break the plastic cover), and you will only have to take out the burnt-out license plate bulb and replace it with the new , then test out and reassemble the whole thing.
How to replace the rear license plate bulb on my Mercedes Classe V
Finally last solution, you must replace the bulb on the backplate of your Mercedes Classe V, but you cannot open the cover from the outside of your vehicle. In such a case, here is the solution to perform this operation:
- Unplug the battery from your Mercedes Classe V
- Find the location of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, held by clips, you will have to lever delicately on all the frame of the trunk to remove it.
- Once located, before removing the bulb holders, unplug the holders for less difficult access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Change the burnt-out license plate bulb on your Mercedes Classe V, verify it and reassemble it, paying attention to the clips on the trunk liner
.
.
There you have it, you have found out the main approaches for changing license plate bulbs on your car, take notice that on some models the technique may be a bit different but you should be able to accomplish it following the explanation of this content. If you can’t do it, don’t hesitate to go to your garage area it would be a shame to break a part of your Mercedes Classe V. If you wish to change other bulbs like the position light bulbs on your Mercedes Classe V or the low beam bulbs on Mercedes Classe V, don’t hesitate to read our articles which demonstrate you the process to follow.
To find more tips on the Mercedes Classe V, take a look at the Mercedes Classe V category.
