Regardless you feel you can’t see as well at nighttime, regardless you feel you’re lighting too low or too high, in all of these occasions, there’s only one component of your automobile to blame – your low beams. Even though this adjustment may appear simple thanks to the thumbwheel on your dashboard, a full adjustment is much more complex than this basic modification, and in this content, we will discover how to adjust the low beam lights of your Mercedes Benz S Class? For this, first of all we will discover why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Mercedes Benz S Class.
Why adjust the low beam lights of your Mercedes Benz S Class?
So let’s commence our content with the advantage of adjusting the low beam lights of your Mercedes Benz S Class. For the majority of us these lights are well enough adjusted, and it seems that they light up enough at night. Unfortunately this is not necessarily the case and examining this setting, either because the low beams of your Mercedes Benz S Class are not illuminating well, or because you have the sense that they are too low or too powerful is a good option .
Adjusting the low beam of your Mercedes Benz S Class for security is a good option.
First of all, the adjusting of the dipped headlights of an Mercedes Benz S Class must be done for a elementary security reason. Regardless whether it’s for you, or for the other users you encounter during your night journeys. In fact, if you don’t see enough, the risk is to fail to see an obstacle on the route, or to anticipate a curve badly. However, if your lights are too powerful, you risk dazzling the people in front of you, and thus putting yourself in danger. It is consequently crucial for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Mercedes Benz S Class for law justifications
In addition to security, there is a law that controls the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at minimum , 30 meters. Another regulation controls their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Mercedes Benz S Class?
We will now move on to the part that concerns you the most in this content, how to adjust the low beams of his Mercedes Benz S Class? This setting may seem to be a bit complicated, but if you stick to the instructions you should be able to do it without too much difficulty.
Preparations to set the low beam of a Mercedes Benz S Class
First of all, you will need to prepare your automobile to adjust your low beam lights in good conditions, here are the preparations to put in place:
- Place your automobile on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure cautiously.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unnecessary weight from the automobile, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Mercedes Benz S Class
Once your automobile is set up, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then move back your automobile up to a distance of between 7 and 10 metres. For the rest of the process here are the basic steps to stick to:
- Open your bonnet, identify the screws for horizontal and vertical adjustment of the lights of your Mercedes Benz S Class (they are in general marked, and those above must adjust the verticality and those on the side controls the horizontality of the adjustment).
- Use a cloth or anything else to hide the light on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most powerful part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once carried out, verify that the low beam setting of your Mercedes Benz S Class is consistent on the road, do not hesitate to verify that it has been driven, on occasion it may move.
.
If you want to adjust the fog lights on your Mercedes Benz S Class, please go through our content on this subject.
To discover more tips on the Mercedes Benz S Class, take a look at the Mercedes Benz S Class category.
