Whether you feel you can’t see as well after dark, regardless whether you feel you’re lighting too low or too high, in all of these circumstances, there’s only one part of your motor vehicle to blame – your low beams. Even though this correction may seem to be simple thanks to the thumbwheel on your dashboard, a whole correction is much more technical than this common realignment, and in this article, we will find out how to adjust the low beam lights of your Lincoln Navigator? For this, first of all we will find out why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Lincoln Navigator.


Why set the low beam lights of your Lincoln Navigator?

So let’s begin our article with the interest of adjusting the low beam lights of your Lincoln Navigator. For most of us these lights are good enough adjusted, and it looks like that they light up enough at night. Unfortunately this is not automatically the case and verifying this setting, either because the low beams of your Lincoln Navigator are not illuminating well, or because you have the feeling that they are too weak or too strong is a good idea .

Adjusting the low beam of your Lincoln Navigator for security is a good idea.

To begin, the adjusting of the dipped headlights of an Lincoln Navigator must be done for a ordinary security cause. Regardless it’s for you, or for the other drivers you come across during your night trips. In reality, if you don’t see enough, the risk is to miss an obstacle on the road, or to predict a curve badly. On the flip side, if your lights are too strong, you risk dazzling the drivers in front of you, and thus putting yourself in danger. It is consequently important for others as well as for you to have an optimal setting of your parking lights.

Setting the low beam headlights of an Lincoln Navigator for law justifications

Furthermore to security, there is a law that controls the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at least 30 meters. Another legislation controls their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.

How to adjust the low-beam headlamps of a Lincoln Navigator?

We will now go forward to the section that interests you the most in this article, how to adjust the low beams of his Lincoln Navigator? This setting may sound a bit difficult, but if you follow the instructions you should be able to do it without too much difficulty.

Preparations to set the low beam of a Lincoln Navigator

To start, you will need to set up your motor vehicle to adjust your low beam lights in good conditions, here are the preparations to do:

  • Place your motor vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
  • Examine your tire pressure cautiously.
  • Examine that the height adjustment knob for the lights is set to 0
  • .

  • Try doing that with half a full tank.
  • Remove all unneeded weight from the motor vehicle, only one person should be in the driver’s seat.

The setting of the low beam headlights of his Lincoln Navigator

Once your motor vehicle is in place, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then step back your motor vehicle up to a distance of between 7 and 10 metres. For the rest of the task here are the steps to follow:

  • Open your bonnet, identify the screws for horizontal and vertical adjustment of the lights of your Lincoln Navigator (they are generally marked, and those above must adjust the verticality and those on the side handles the horizontality of the adjustment).
  • Use a cloth or some thing else to hide the light on which you are not making the manipulation.
  • Using the screws to make the horizontal manipulation, you should have the most strong part of the beam which should be a little to the right of the vertical line marked on the wall
  • .

  • With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
  • Once finished, examine that the low beam setting of your Lincoln Navigator is consistent on the road, do not be reluctant to examine that it has been driven, on occasion it may move.

If you want to adjust the fog lights on your Lincoln Navigator, please browse our article on this subject.

Whenever you have any further questions about the Lincoln Navigator, do not hesitate to consult our Lincoln Navigator category.