It doesn’t matter if you feel you can’t see good enough through the night, regardless whether you feel you’re lighting too low or too high, in all of these circumstances, there’s only one part of your motor vehicle to blame – your low beams. Although this correction may seem to be easy to do thanks to the thumbwheel on your dashboard, a full correction is much more complex than this simple manipulation, and in this article content, we will find out how to adjust the low beam lights of your Lexus GS? For this, first of all we will find out why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Lexus GS.
Why set the low beam lights of your Lexus GS?
So let’s begin our article content with the interest of adjusting the low beam lights of your Lexus GS. For most of us these lights are well enough adjusted, and it looks like that they light up enough at night. Sadly this is not automatically the case and examining this setting, either because the low beams of your Lexus GS are not illuminating well, or because you have the feeling that they are too weak or too powerful is a good plan .
Adjusting the low beam of your Lexus GS for safety is a good plan.
To start, the adjusting of the dipped headlights of an Lexus GS must be done for a ordinary safety cause. It doesn’t matter if it’s for you, or for the other drivers you encounter during your night journeys. Indeed, if you don’t see enough, the real danger is to fail to see an obstacle on the road, or to anticipate a curve badly. However, if your lights are too powerful, you risk dazzling the people in front of you, and thus putting yourself in danger. It is therefore crucial for others as well as for you to have an optimal setting of your parking lights.
Setting the low beam headlights of an Lexus GS for legal motives
Additionally to safety, there is a law that regulates the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at least 30 meters. Another regulation regulates their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Lexus GS?
We will now move on to the part that concerns you the most in this article content, how to adjust the low beams of his Lexus GS? This setting may appear a bit complex, but if you follow the instructions you should be able to do it without too much difficulty.
Preparations to set the low beam of a Lexus GS
Firstly, you will need to prepare your motor vehicle to adjust your low beam lights in good conditions, here are the preparations to put in place:
- Place your motor vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure carefully.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the motor vehicle, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Lexus GS
Once your motor vehicle is in place, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then step back your motor vehicle up to a distance of between 7 and 10 metres. For the rest of the procedure here are the basic steps to follow:
- Open your bonnet, locate the screws for horizontal and vertical adjustment of the lights of your Lexus GS (they are commonly marked, and those above must adjust the verticality and those on the side controls the horizontality of the adjustment).
- Use a cloth or something else to hide the light on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most strong part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once complete, check that the low beam setting of your Lexus GS is consistent on the road, do not hesitate to check that it has been driven, in some cases it may move.
.
If you want to adjust the fog lights on your Lexus GS, please go through our article content on this subject.
To discover more tips on the Lexus GS, take a look at the Lexus GS category.
