Regardless you feel you can’t see as well at night, regardless whether you feel you’re lighting too low or too high, in all of these occasions, there’s only one part of your vehicle to blame – your low beams. Despite the fact this adjustment may look simple thanks to the thumbwheel on your dashboard, a full adjustment is much more complex than this common modification, and in this content page, we will see how to adjust the low beam lights of your Infiniti QX30? For this, first of all we will see why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Infiniti QX30.
Why adjust the low beam lights of your Infiniti QX30?
So let’s begin our content page with the advantage of adjusting the low beam lights of your Infiniti QX30. For a lot of people these lights are sufficiently adjusted, and it seems that they light up enough at night. Sadly this is not always the case and verifying this setting, either because the low beams of your Infiniti QX30 are not lighting up well, or because you have the sense that they are too weak or too powerful is a good option .
Adjusting the low beam of your Infiniti QX30 for safety is a good option.
To start, the adjusting of the dipped headlights of an Infiniti QX30 must be done for a basic safety purpose. It doesn’t matter if it’s for you, or for the other drivers you encounter during your night trips. Indeed, if you don’t see enough, the real danger is to fail to see an obstacle on the road, or to predict a curve badly. However, if your lights are too powerful, you risk dazzling the drivers in front of you, and thus putting yourself in danger. It is subsequently essential for others as well as for you to have an optimal setting of your parking lights.
Setting the low beam headlights of an Infiniti QX30 for law justifications
In addition to safety, there is a law that regulates the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at minimum , 30 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Infiniti QX30?
We will now go forward to the part that interests you the more in this content page, how to adjust the low beams of his Infiniti QX30? This setting may sound a bit difficult, but if you stick to the recommendations you should be able to do it without too much difficulty.
Preparations to set the low beam of a Infiniti QX30
First of all, you will need to prepare your vehicle to adjust your low beam lights in good conditions, here are the preparations to do:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure cautiously.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the vehicle, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Infiniti QX30
Once your vehicle is set up, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then step back your vehicle up to a distance of between 7 and 10 metres. For the rest of the process here are the guidelines to stick to:
- Open your bonnet, identify the screws for horizontal and vertical adjustment of the lights of your Infiniti QX30 (they are usually marked, and those above must adjust the verticality and those on the side manages the horizontality of the adjustment).
- Use a cloth or anything else to hide the light on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once complete, check that the low beam setting of your Infiniti QX30 is consistent on the road, do not be reluctant to check that it has been driven, in some cases it may move.
.
If you want to adjust the fog lights on your Infiniti QX30, please read our content page on this subject.
If perhaps you have any further questions about the Infiniti QX30, do not hesitate to consult our Infiniti QX30 category.
