Whether you feel you can’t see good enough at night, whether you feel you’re lighting too low or too high, in all of these occasions, there’s only one part of your motor vehicle to blame – your low beams. Despite the fact this correction may appear simple thanks to the thumbwheel on your dashboard, a whole correction is much more complicated than this common modification, and in this article content, we will discover how to adjust the low beam lights of your Hyundai Ix20? For this, first of all we will discover why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Hyundai Ix20.
Why adjust the low beam lights of your Hyundai Ix20?
So let’s commence our article content with the point of adjusting the low beam lights of your Hyundai Ix20. For many people these lights are good enough adjusted, and it seems that they light up enough at night. Unfortunately this is not necessarily the case and checking out this setting, either because the low beams of your Hyundai Ix20 are not lighting up well, or because you have the feeling that they are too low or too strong is a good option .
Adjusting the low beam of your Hyundai Ix20 for safety is a good option.
To start, the adjusting of the dipped headlights of an Hyundai Ix20 must be done for a basic safety cause. Regardless it’s for you, or for the other users you come across during your night trips. In reality, if you don’t see enough, the real danger is to fail to see an obstacle on the road, or to predict a curve badly. On the flip side, if your lights are too strong, you risk dazzling the drivers in front of you, and thus putting yourself at risk. It is consequently important for others as well as for you to have an optimal setting of your parking lights.
Setting the low beam headlights of an Hyundai Ix20 for legal justifications
Additionally to safety, there is a law that controls the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at minimum , 30 meters. Another legislation controls their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Hyundai Ix20?
We will now move on to the part that concerns you the more in this article content, how to adjust the low beams of his Hyundai Ix20? This setting may appear to be a bit complicated, but if you follow the instructions you should be able to do it without too much issue.
Preparations to set the low beam of a Hyundai Ix20
Firstly, you will need to prepare your motor vehicle to adjust your low beam lights in good conditions, here are the preparations to put in place:
- Place your motor vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure rigorously.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the motor vehicle, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Hyundai Ix20
Once your motor vehicle is into position, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then move back your motor vehicle up to a distance of between 7 and 10 metres. For the rest of the task here are the guidelines to follow:
- Open your bonnet, situate the screws for horizontal and vertical adjustment of the lights of your Hyundai Ix20 (they are in most cases marked, and those above must adjust the verticality and those on the side handles the horizontality of the adjustment).
- Use a cloth or anything else to hide the light on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most powerful part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once accomplished, check that the low beam setting of your Hyundai Ix20 is consistent on the road, do not hesitate to check that it has been driven, in some cases it may move.
.
If you want to adjust the fog lights on your Hyundai Ix20, please go through our article content on this subject.
If you have any further questions about the Hyundai Ix20, do not hesitate to consult our Hyundai Ix20 category.
