Regardless you feel you can’t see good enough after dark, whether you feel you’re lighting too low or too high, in all of these cases, there’s only one part of your motor vehicle to blame – your low beams. Although this correction may seem to be easy thanks to the thumbwheel on your dashboard, a full correction is much more complex than this simple manipulation, and in this article content, we will discover how to adjust the low beam lights of your Honda Pilot? For this, first of all we will discover why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Honda Pilot.
Why set the low beam lights of your Honda Pilot?
So let’s commence our article content with the advantage of adjusting the low beam lights of your Honda Pilot. For many of us these lights are sufficiently adjusted, and it seems that they light up enough at night. Unfortunately this is not constantly the case and checking out this setting, either because the low beams of your Honda Pilot are not illuminating well, or because you have the sense that they are too low or too strong is a good plan .
Adjusting the low beam of your Honda Pilot for safety is a good plan.
To begin, the adjusting of the dipped headlights of an Honda Pilot must be done for a elementary safety purpose. Regardless whether it’s for you, or for the other users you encounter during your night trips. Indeed, if you don’t see enough, the risk is to miss an obstacle on the road, or to anticipate a curve badly. In contrast, if your lights are too strong, you risk dazzling the people in front of you, and thus putting yourself in danger. It is subsequently essential for others as well as for you to have an optimal setting of your parking lights.
Setting the low beam headlights of an Honda Pilot for legal reasons
Moreover to safety, there is a law that supervises the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at minimum , 30 meters. Another regulation supervises their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Honda Pilot?
We will now go forward to the part that interests you the most in this article content, how to adjust the low beams of his Honda Pilot? This setting may appear a bit difficult, but if you stick to the recommendations you should be able to do it without too much difficulty.
Preparations to set the low beam of a Honda Pilot
Firstly, you will need to prepare your motor vehicle to adjust your low beam lights in good conditions, here are the preparations to apply:
- Place your motor vehicle on a floor in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure precisely.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unnecessary weight from the motor vehicle, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Honda Pilot
Once your motor vehicle is set up, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then back your motor vehicle up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to stick to:
- Open your bonnet, identify the screws for horizontal and vertical adjustment of the lights of your Honda Pilot (they are commonly marked, and those above must adjust the verticality and those on the side manages the horizontality of the adjustment).
- Use a cloth or some thing else to hide the light on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once done, check that the low beam setting of your Honda Pilot is consistent on the road, do not be reluctant to check that it has been driven, in some cases it may move.
.
If you want to adjust the fog lights on your Honda Pilot, please browse our article content on this subject.
If you need more guides on the Honda Pilot, go to our Honda Pilot category.
