Regardless whether you feel you can’t see as well during the night, regardless whether you feel you’re lighting too low or too high, in all of these occasions, there’s only one part of your vehicle to blame – your low beams. Despite the fact this correction may seem to be easy to do thanks to the thumbwheel on your dashboard, a full correction is much more technical than this common modification, and in this article content, we will discover how to adjust the low beam lights of your Ford Focus? For this, first of all we will discover why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Ford Focus.
Why set the low beam lights of your Ford Focus?
So let’s begin our article content with the interest of adjusting the low beam lights of your Ford Focus. For the majority of us these lights are sufficiently adjusted, and it looks like that they light up enough at night. Unfortunately this is not constantly the case and checking this setting, either because the low beams of your Ford Focus are not illuminating well, or because you have the feeling that they are too low or too powerful is a wise decision .
Adjusting the low beam of your Ford Focus for safety is a wise decision.
To begin, the adjusting of the dipped headlights of an Ford Focus must be done for a simple safety reason. It doesn’t matter if it’s for you, or for the other drivers you come across during your night trips. In reality, if you don’t see enough, the risk is to fail to see an obstacle on the route, or to anticipate a curve badly. On the other hand, if your lights are too powerful, you risk dazzling the people in front of you, and thus putting yourself at risk. It is therefore crucial for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Ford Focus for legal motives
In addition to safety, there is a law that regulates the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at minimum , 30 meters. Another law regulates their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Ford Focus?
We will now move on to the section that concerns you the most in this article content, how to adjust the low beams of his Ford Focus? This setting may seem to be a bit difficult, but if you follow the recommendations you should be able to do it without too much difficulty.
Preparations to set the low beam of a Ford Focus
To start, you will need to set up your vehicle to adjust your low beam lights in good conditions, here are the preparations to do:
- Place your vehicle on a floor in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure precisely.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the vehicle, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Ford Focus
Once your vehicle is set up, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then move back your vehicle up to a distance of between 7 and 10 metres. For the rest of the operation here are the basic steps to follow:
- Open your bonnet, identify the screws for horizontal and vertical adjustment of the lights of your Ford Focus (they are generally marked, and those above must adjust the verticality and those on the side manages the horizontality of the adjustment).
- Use a cloth or anything else to hide the light on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most strong part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once carried out, examine that the low beam setting of your Ford Focus is consistent on the road, do not hesitate to examine that it has been driven, on occasion it may move.
.
If you want to adjust the fog lights on your Ford Focus, please examine our article content on this subject.
If you need more guides on the Ford Focus, go to our Ford Focus category.
