It doesn’t matter if you feel you can’t see as well during the night, regardless you feel you’re lighting too low or too high, in all of these occasions, there’s only one part of your vehicle to blame – your low beams. Despite the fact this correction may appear simple thanks to the thumbwheel on your dashboard, a complete correction is much more complex than this basic modification, and in this article, we will see how to adjust the low beam lights of your Ford F 350 ? For this, first we will see why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Ford F 350 .
Why set the low beam lights of your Ford F 350 ?
So let’s commence our article with the benefit of adjusting the low beam lights of your Ford F 350 . For many people these lights are sufficiently adjusted, and it looks like that they light up enough at night. Sadly this is not always the case and looking at this setting, either because the low beams of your Ford F 350 are not illuminating well, or because you have the sense that they are too low or too strong is a good idea .
Adjusting the low beam of your Ford F 350 for safety is a good idea.
To begin, the adjusting of the dipped headlights of an Ford F 350 must be done for a elementary safety reason. It doesn’t matter if it’s for you, or for the other users you encounter during your night trips. In reality, if you don’t see enough, the real danger is to miss an obstacle on the route, or to predict a curve badly. In contrast, if your lights are too strong, you risk dazzling the people in front of you, and thus putting yourself in danger. It is subsequently necessary for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Ford F 350 for legal motives
Furthermore to safety, there is a law that supervises the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at minimum , 30 meters. Another law supervises their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Ford F 350 ?
We will now move on to the part that concerns you the most in this article, how to adjust the low beams of his Ford F 350 ? This setting may seem a bit complicated, but if you stick to the guidelines you should be able to do it without too much difficulty.
Preparations to set the low beam of a Ford F 350
To start, you will need to prepare your vehicle to adjust your low beam lights in good conditions, here are the preparations to apply:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Examine your tire pressure rigorously.
- Examine that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unnecessary weight from the vehicle, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Ford F 350
Once your vehicle is into position, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then move back your vehicle up to a distance of between 7 and 10 metres. For the rest of the process here are the simple steps to stick to:
- Open your bonnet, identify the screws for horizontal and vertical adjustment of the lights of your Ford F 350 (they are commonly marked, and those above must adjust the verticality and those on the side handles the horizontality of the adjustment).
- Use a cloth or some thing else to hide the light on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical manipulation, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, check that the low beam setting of your Ford F 350 is consistent on the road, do not hesitate to check that it has been driven, on occasion it may move.
.
If you want to adjust the fog lights on your Ford F 350 , please examine our article on this subject.
Whenever you have any additional questions about the Ford F 350 , do not hesitate to consult our Ford F 350 category.
