Whether you feel you can’t see as well at nighttime, whether you feel you’re lighting too low or too high, in all of these circumstances, there’s only one component of your automobile to blame – your low beams. Although this adjustment may seem to be easy to do thanks to the thumbwheel on your dashboard, a whole adjustment is much more technical than this simple modification, and in this content, we will see how to adjust the low beam lights of your Volkswagen Passat ? For this, first of all we will see why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Volkswagen Passat .
Why set the low beam lights of your Volkswagen Passat ?
So let’s commence our content with the advantage of adjusting the low beam lights of your Volkswagen Passat . For the majority of us these lights are good enough adjusted, and it seems that they light up enough at night. Sadly this is not constantly the case and looking at this setting, either because the low beams of your Volkswagen Passat are not lighting up well, or because you have the sense that they are too low or too powerful is a good plan .
Adjusting the low beam of your Volkswagen Passat for security is a good plan.
To begin, the adjusting of the dipped headlights of an Volkswagen Passat must be done for a elementary security purpose. It doesn’t matter if it’s for you, or for the other drivers you encounter during your night journeys. In reality, if you don’t see enough, the risk is to fail to see an obstacle on the route, or to anticipate a curve badly. On the other hand, if your lights are too powerful, you risk dazzling the drivers in front of you, and thus putting yourself in danger. It is subsequently essential for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Volkswagen Passat for legal reasons
Moreover to security, there is a law that supervises the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at minimum , 30 meters. Another regulation supervises their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Volkswagen Passat ?
We will now go forward to the part that interests you the more in this content, how to adjust the low beams of his Volkswagen Passat ? This setting may appear a bit complicated, but if you follow the guidelines you should be able to do it without too much issue.
Preparations to set the low beam of a Volkswagen Passat
First of all, you will need to prepare your automobile to adjust your low beam lights in good conditions, here are the preparations to apply:
- Place your automobile on a floor in front of a white wall for example, about 4 or 5 meters from the wall.
- Examine your tire pressure precisely.
- Examine that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the automobile, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Volkswagen Passat
Once your automobile is into position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then step back your automobile up to a distance of between 7 and 10 metres. For the rest of the procedure here are the simple steps to follow:
- Open your bonnet, locate the screws for horizontal and vertical adjustment of the lights of your Volkswagen Passat (they are generally marked, and those above must adjust the verticality and those on the side controls the horizontality of the adjustment).
- Use a cloth or anything else to hide the light on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most powerful part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once complete, verify that the low beam setting of your Volkswagen Passat is consistent on the road, do not hesitate to verify that it has been driven, sometimes it may move.
.
If you want to adjust the fog lights on your Volkswagen Passat , please examine our content on this subject.
To get more tips on the Volkswagen Passat , take a look at the Volkswagen Passat category.
