Whether you feel you can’t see properly during the night, regardless you feel you’re lighting too low or too high, in all of these situations, there’s only one component of your motor vehicle to blame – your low beams. Although this adjustment may seem simple thanks to the thumbwheel on your dashboard, a full adjustment is much more technical than this common realignment, and in this content, we will see how to adjust the low beam lights of your Fiat Bravo 2? For this, first we will see why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Fiat Bravo 2.
Why adjust the low beam lights of your Fiat Bravo 2?
So let’s start our content with the point of adjusting the low beam lights of your Fiat Bravo 2. For many of us these lights are well enough adjusted, and it looks like that they light up enough at night. However this is not constantly the case and checking out this setting, either because the low beams of your Fiat Bravo 2 are not illuminating well, or because you have the feeling that they are too low or too strong is a good idea .
Adjusting the low beam of your Fiat Bravo 2 for safety is a good idea.
To start, the adjusting of the dipped headlights of an Fiat Bravo 2 must be done for a ordinary safety purpose. Regardless it’s for you, or for the other drivers you come across during your night journeys. Indeed, if you don’t see enough, the risk is to fail to see an obstacle on the route, or to predict a curve badly. On the flip side, if your lights are too strong, you risk dazzling the people in front of you, and thus putting yourself at risk. It is subsequently important for others as well as for you to have an optimal setting of your parking lights.
Setting the low beam headlights of an Fiat Bravo 2 for law reasons
Additionally to safety, there is a law that regulates the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at minimum , 30 meters. Another regulation regulates their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Fiat Bravo 2?
We will now go forward to the part that interests you the more in this content, how to adjust the low beams of his Fiat Bravo 2? This setting may appear to be a bit difficult, but if you stick to the recommendations you should be able to do it without too much difficulty.
Preparations to set the low beam of a Fiat Bravo 2
Firstly, you will need to set up your motor vehicle to adjust your low beam lights in good conditions, here are the preparations to put in place:
- Place your motor vehicle on a area in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure cautiously.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the motor vehicle, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Fiat Bravo 2
Once your motor vehicle is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then move back your motor vehicle up to a distance of between 7 and 10 metres. For the rest of the procedure here are the basic steps to stick to:
- Open your bonnet, situate the screws for horizontal and vertical adjustment of the lights of your Fiat Bravo 2 (they are usually marked, and those above must adjust the verticality and those on the side handles the horizontality of the adjustment).
- Use a cloth or some thing else to hide the light on which you are not making the manipulation.
- Using the screws to make the horizontal manipulation, you should have the most powerful part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once accomplished, examine that the low beam setting of your Fiat Bravo 2 is consistent on the road, do not be reluctant to examine that it has been driven, on occasion it may move.
.
If you want to adjust the fog lights on your Fiat Bravo 2, please examine our content on this subject.
To get more tips on the Fiat Bravo 2, take a look at the Fiat Bravo 2 category.
