Whether you feel you can’t see good enough after dark, regardless whether you feel you’re lighting too low or too high, in all of these occasions, there’s only one component of your motor vehicle to blame – your low beams. Even though this adjustment may appear simple thanks to the thumbwheel on your dashboard, a complete adjustment is much more technical than this ordinary manipulation, and in this content page, we will discover how to adjust the low beam lights of your Fiat Panda 2? For this, first of all we will discover why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Fiat Panda 2.
Why adjust the low beam lights of your Fiat Panda 2?
So let’s start our content page with the interest of adjusting the low beam lights of your Fiat Panda 2. For a lot of people these lights are sufficiently adjusted, and it looks like that they light up enough at night. Unfortunately this is not constantly the case and checking out this setting, either because the low beams of your Fiat Panda 2 are not illuminating well, or because you have the sense that they are too weak or too strong is a good plan .
Adjusting the low beam of your Fiat Panda 2 for safety is a good plan.
Firstly, the adjusting of the dipped headlights of an Fiat Panda 2 must be done for a ordinary safety purpose. Whether it’s for you, or for the other drivers you come across during your night trips. In fact, if you don’t see enough, the real danger is to miss an obstacle on the road, or to anticipate a curve badly. In contrast, if your lights are too strong, you risk dazzling the people in front of you, and thus putting yourself in danger. It is consequently fundamental for others as well as for you to have an optimal setting of your parking lights.
Setting the low beam headlights of an Fiat Panda 2 for law justifications
Additionally to safety, there is a law that controls the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at minimum , 30 meters. Another law controls their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Fiat Panda 2?
We will now move on to the section that concerns you the most in this content page, how to adjust the low beams of his Fiat Panda 2? This setting may seem to be a bit difficult, but if you follow the instructions you should be able to do it without too much issue.
Preparations to set the low beam of a Fiat Panda 2
Firstly, you will need to prepare your motor vehicle to adjust your low beam lights in good conditions, here are the preparations to apply:
- Place your motor vehicle on a area in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure precisely.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unnecessary weight from the motor vehicle, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Fiat Panda 2
Once your motor vehicle is in position, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then step back your motor vehicle up to a distance of between 7 and 10 metres. For the rest of the task here are the basic steps to follow:
- Open your bonnet, locate the screws for horizontal and vertical adjustment of the lights of your Fiat Panda 2 (they are in most cases marked, and those above must adjust the verticality and those on the side handles the horizontality of the adjustment).
- Use a cloth or something else to hide the light on which you are not making the manipulation.
- Using the screws to make the horizontal manipulation, you should have the most strong part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once accomplished, verify that the low beam setting of your Fiat Panda 2 is consistent on the road, do not hesitate to verify that it has been driven, in some cases it may move.
.
If you want to adjust the fog lights on your Fiat Panda 2, please examine our content page on this subject.
To find more tips on the Fiat Panda 2, take a look at the Fiat Panda 2 category.
