Regardless you feel you can’t see properly during the night, regardless whether you feel you’re lighting too low or too high, in all of these occasions, there’s only one part of your automobile to blame – your low beams. Even though this correction may seem to be easy to do thanks to the thumbwheel on your dashboard, a full correction is much more technical than this simple manipulation, and in this article content, we will see how to adjust the low beam lights of your Fiat 500 X? For this, first of all we will see why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Fiat 500 X.
Why adjust the low beam lights of your Fiat 500 X?
So let’s start our article content with the benefit of adjusting the low beam lights of your Fiat 500 X. For most of us these lights are well enough adjusted, and it looks like that they light up enough at night. Unfortunately this is not constantly the case and examining this setting, either because the low beams of your Fiat 500 X are not lighting up well, or because you have the feeling that they are too weak or too strong is a good plan .
Adjusting the low beam of your Fiat 500 X for safety is a good plan.
Firstly, the adjusting of the dipped headlights of an Fiat 500 X must be done for a simple safety cause. Regardless whether it’s for you, or for the other drivers you come across during your night trips. In reality, if you don’t see enough, the risk is to miss an obstacle on the route, or to anticipate a curve badly. Alternatively, if your lights are too strong, you risk dazzling the people in front of you, and thus putting yourself at risk. It is subsequently fundamental for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Fiat 500 X for legal motives
In addition to safety, there is a law that controls the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at minimum , 30 meters. Another legislation controls their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Fiat 500 X?
We will now go forward to the part that interests you the most in this article content, how to adjust the low beams of his Fiat 500 X? This setting may seem to be a bit difficult, but if you stick to the instructions you should be able to do it without too much difficulty.
Preparations to set the low beam of a Fiat 500 X
Firstly, you will need to set up your automobile to adjust your low beam lights in good conditions, here are the preparations to put in place:
- Place your automobile on a floor in front of a white wall for example, about 4 or 5 meters from the wall.
- Examine your tire pressure precisely.
- Examine that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the automobile, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Fiat 500 X
Once your automobile is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then back your automobile up to a distance of between 7 and 10 metres. For the rest of the process here are the basic steps to stick to:
- Open your bonnet, situate the screws for horizontal and vertical adjustment of the lights of your Fiat 500 X (they are almost always marked, and those above must adjust the verticality and those on the side adjusts the horizontality of the adjustment).
- Use a cloth or something else to hide the light on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most powerful part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once complete, check that the low beam setting of your Fiat 500 X is consistent on the road, do not hesitate to check that it has been driven, in some cases it may move.
.
If you want to adjust the fog lights on your Fiat 500 X, please browse our article content on this subject.
To discover more tips on the Fiat 500 X, take a look at the Fiat 500 X category.
