It doesn’t matter if you feel you can’t see good enough after dark, whether you feel you’re lighting too low or too high, in all of these cases, there’s only one part of your car to blame – your low beams. Despite the fact this adjustment may seem easy thanks to the thumbwheel on your dashboard, a full adjustment is much more complicated than this ordinary manipulation, and in this content, we will find out how to adjust the low beam lights of your Chevrolet Equinox? For this, first of all we will find out why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Chevrolet Equinox.
Why adjust the low beam lights of your Chevrolet Equinox?
So let’s start our content with the benefit of adjusting the low beam lights of your Chevrolet Equinox. For most people these lights are good enough adjusted, and it looks like that they light up enough at night. However this is not always the case and checking out this setting, either because the low beams of your Chevrolet Equinox are not lighting up well, or because you have the sense that they are too weak or too strong is a good option .
Adjusting the low beam of your Chevrolet Equinox for security is a good option.
Firstly, the adjusting of the dipped headlights of an Chevrolet Equinox must be done for a ordinary security purpose. Regardless it’s for you, or for the other drivers you encounter during your night journeys. Indeed, if you don’t see enough, the risk is to miss an obstacle on the route, or to predict a curve badly. On the flip side, if your lights are too strong, you risk dazzling the drivers in front of you, and thus putting yourself at risk. It is consequently essential for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Chevrolet Equinox for law reasons
Furthermore to security, there is a law that controls the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at least 30 meters. Another legislation controls their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Chevrolet Equinox?
We will now go forward to the section that concerns you the more in this content, how to adjust the low beams of his Chevrolet Equinox? This setting may appear to be a bit complex, but if you stick to the instructions you should be able to do it without too much difficulty.
Preparations to set the low beam of a Chevrolet Equinox
First of all, you will need to prepare your car to adjust your low beam lights in good conditions, here are the preparations to do:
- Place your car on a area in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure rigorously.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unnecessary weight from the car, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Chevrolet Equinox
Once your car is set up, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then back your car up to a distance of between 7 and 10 metres. For the rest of the procedure here are the guidelines to stick to:
- Open your bonnet, locate the screws for horizontal and vertical adjustment of the lights of your Chevrolet Equinox (they are in most cases marked, and those above must adjust the verticality and those on the side controls the horizontality of the adjustment).
- Use a cloth or something else to hide the light on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once complete, examine that the low beam setting of your Chevrolet Equinox is consistent on the road, do not be reluctant to examine that it has been driven, on occasion it may move.
.
If you want to adjust the fog lights on your Chevrolet Equinox, please browse our content on this subject.
If you wish more tutorials on the Chevrolet Equinox, go to our Chevrolet Equinox category.
