It doesn’t matter if you feel you can’t see properly at night, regardless you feel you’re lighting too low or too high, in all of these cases, there’s only one component of your vehicle to blame – your low beams. Although this correction may seem simple thanks to the thumbwheel on your dashboard, a full correction is much more complicated than this ordinary realignment, and in this content, we will discover how to adjust the low beam lights of your Bmw Serie 1 E82? For this, first we will discover why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Bmw Serie 1 E82.
Why set the low beam lights of your Bmw Serie 1 E82?
So let’s begin our content with the interest of adjusting the low beam lights of your Bmw Serie 1 E82. For many of us these lights are well enough adjusted, and it looks like that they light up enough at night. Sadly this is not necessarily the case and checking out this setting, either because the low beams of your Bmw Serie 1 E82 are not lighting up well, or because you have the sense that they are too low or too strong is a good option .
Adjusting the low beam of your Bmw Serie 1 E82 for safety is a good option.
Firstly, the adjusting of the dipped headlights of an Bmw Serie 1 E82 must be done for a elementary safety purpose. Regardless it’s for you, or for the other users you encounter during your night journeys. In fact, if you don’t see enough, the risk is to miss an obstacle on the road, or to predict a curve badly. On the flip side, if your lights are too strong, you risk dazzling the drivers in front of you, and thus putting yourself at risk. It is as a consequence important for others as well as for you to have an optimal setting of your parking lights.
Setting the low beam headlights of an Bmw Serie 1 E82 for law reasons
Moreover to safety, there is a law that regulates the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at minimum , 30 meters. Another regulation regulates their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Bmw Serie 1 E82?
We will now go forward to the part that interests you the most in this content, how to adjust the low beams of his Bmw Serie 1 E82? This setting may seem to be a bit complex, but if you follow the recommendations you should be able to do it without too much difficulty.
Preparations to set the low beam of a Bmw Serie 1 E82
Firstly, you will need to set up your vehicle to adjust your low beam lights in good conditions, here are the preparations to apply:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Examine your tire pressure carefully.
- Examine that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the vehicle, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Bmw Serie 1 E82
Once your vehicle is in place, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the operation here are the steps to follow:
- Open your bonnet, identify the screws for horizontal and vertical adjustment of the lights of your Bmw Serie 1 E82 (they are almost always marked, and those above must adjust the verticality and those on the side adjusts the horizontality of the adjustment).
- Use a cloth or some thing else to hide the light on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most strong part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once accomplished, verify that the low beam setting of your Bmw Serie 1 E82 is consistent on the road, do not be reluctant to verify that it has been driven, sometimes it may move.
.
If you want to adjust the fog lights on your Bmw Serie 1 E82, please examine our content on this subject.
If perhaps you have any additional questions about the Bmw Serie 1 E82, do not hesitate to consult our Bmw Serie 1 E82 category.
