Regardless whether you feel you can’t see good enough after dark, regardless whether you feel you’re lighting too low or too high, in all of these cases, there’s only one component of your car to blame – your low beams. Although this correction may appear easy to do thanks to the thumbwheel on your dashboard, a full correction is much more technical than this ordinary modification, and in this content, we will discover how to adjust the low beam lights of your Audi Sq7? For this, first we will discover why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Audi Sq7.
Why adjust the low beam lights of your Audi Sq7?
So let’s begin our content with the benefit of adjusting the low beam lights of your Audi Sq7. For a lot of people these lights are sufficiently adjusted, and it seems that they light up enough at night. However this is not automatically the case and checking out this setting, either because the low beams of your Audi Sq7 are not lighting up well, or because you have the sense that they are too weak or too strong is a good option .
Adjusting the low beam of your Audi Sq7 for safety is a good option.
To begin, the adjusting of the dipped headlights of an Audi Sq7 must be done for a ordinary safety cause. Whether it’s for you, or for the other users you encounter during your night journeys. In fact, if you don’t see enough, the real danger is to fail to see an obstacle on the road, or to anticipate a curve badly. On the contrary, if your lights are too strong, you risk dazzling the drivers in front of you, and thus putting yourself at risk. It is consequently essential for others as well as for you to have an optimal setting of your parking lights.
Setting the low beam headlights of an Audi Sq7 for law reasons
Furthermore to safety, there is a law that supervises the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at minimum , 30 meters. Another law supervises their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Audi Sq7?
We will now go forward to the part that interests you the more in this content, how to adjust the low beams of his Audi Sq7? This setting may seem to be a bit complicated, but if you follow the recommendations you should be able to do it without too much difficulty.
Preparations to set the low beam of a Audi Sq7
To start, you will need to set up your car to adjust your low beam lights in good conditions, here are the preparations to put in place:
- Place your car on a area in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure carefully.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unnecessary weight from the car, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Audi Sq7
Once your car is in position, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then step back your car up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to follow:
- Open your bonnet, situate the screws for horizontal and vertical adjustment of the lights of your Audi Sq7 (they are usually marked, and those above must adjust the verticality and those on the side manages the horizontality of the adjustment).
- Use a cloth or some thing else to hide the light on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most strong part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once accomplished, examine that the low beam setting of your Audi Sq7 is consistent on the road, do not hesitate to examine that it has been driven, on occasion it may move.
.
If you want to adjust the fog lights on your Audi Sq7, please examine our content on this subject.
To find more tips on the Audi Sq7, take a look at the Audi Sq7 category.
