Whether you feel you can’t see properly during the night, regardless whether you feel you’re lighting too low or too high, in all of these situations, there’s only one part of your vehicle to blame – your low beams. Even though this correction may look easy to do thanks to the thumbwheel on your dashboard, a whole correction is much more complicated than this common manipulation, and in this article, we will see how to adjust the low beam lights of your Audi Rs4? For this, first we will see why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Audi Rs4.
Why adjust the low beam lights of your Audi Rs4?
So let’s start our article with the benefit of adjusting the low beam lights of your Audi Rs4. For most of us these lights are good enough adjusted, and it seems that they light up enough at night. However this is not constantly the case and verifying this setting, either because the low beams of your Audi Rs4 are not illuminating well, or because you have the feeling that they are too low or too strong is a wise decision .
Adjusting the low beam of your Audi Rs4 for safety is a wise decision.
To start, the adjusting of the dipped headlights of an Audi Rs4 must be done for a basic safety purpose. Regardless it’s for you, or for the other drivers you encounter during your night journeys. In fact, if you don’t see enough, the risk is to fail to see an obstacle on the route, or to predict a curve badly. On the flip side, if your lights are too strong, you risk dazzling the car owners in front of you, and thus putting yourself at risk. It is consequently fundamental for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Audi Rs4 for law justifications
Additionally to safety, there is a law that controls the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at minimum , 30 meters. Another regulation controls their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Audi Rs4?
We will now go forward to the part that interests you the more in this article, how to adjust the low beams of his Audi Rs4? This setting may seem a bit complicated, but if you follow the instructions you should be able to do it without too much issue.
Preparations to set the low beam of a Audi Rs4
Firstly, you will need to set up your vehicle to adjust your low beam lights in good conditions, here are the preparations to do:
- Place your vehicle on a area in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure cautiously.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the vehicle, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Audi Rs4
Once your vehicle is set up, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then move back your vehicle up to a distance of between 7 and 10 metres. For the rest of the procedure here are the guidelines to follow:
- Open your bonnet, situate the screws for horizontal and vertical adjustment of the lights of your Audi Rs4 (they are in general marked, and those above must adjust the verticality and those on the side manages the horizontality of the adjustment).
- Use a cloth or anything else to hide the light on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most powerful part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical manipulation, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, check that the low beam setting of your Audi Rs4 is consistent on the road, do not hesitate to check that it has been driven, in some cases it may move.
.
If you want to adjust the fog lights on your Audi Rs4, please read our article on this subject.
In the event that you have any further questions about the Audi Rs4, do not hesitate to consult our Audi Rs4 category.
