Your car’s handbrake is a required security feature based on the highway code, in fact , this aims to quit your Audi Rs4, even on the slight slope. It must be in addition to the main brake system controls. It will be possible that after a while the cable system of the hand brake will loosen up and you will not pass the technical control or you may well feel that it truly is no longer stopping your car. To address these challenges, we will look at how to adjust the hand brake on your Audi Rs4 . To accomplish this, first we will see the adjustment of your manual handbrake on Audi Rs4 , then simply, in a second step, how to adjust an automatic handbrake, and ultimately the price of the service performed by a professional.
Adjusting a manual handbrake on Audi Rs4?
Therefore we start out our document with the hand brake adjustment of a Audi Rs4 in its manual version. This version performs in a simple way using a system of cable and screws that allow you to control the tension on the device and thus to modify the stroke on the lever of the handbrake. To act on it you will need to act on these types of screws in order to extend the handbrake cable of the Audi Rs4 . In any case, ahead of adjusting the hand brake, you must check that your rear end wheels aren’t blocked during the adjustment. Make sure you find under the detailed technique to carry out this kind of intervention:
- On the level of your handbrake, remove the plastic console that protects it using the torx screws and clips.
- Once done, you should see a trapdoor in your handbrake, open it up to see the screw and cable system.
- You will have to locate the locknuts and loosen them with a wrench to allow you to change the cable stress.
- Now screw on the lock nuts upon both sides, make sure you make the exact changes upon both sides to hold a balanced brake, and check that the hand brake handle of your Audi Rs4 has a stroke of about three notches.
- Tighten up the locknuts and test out the locking of the wheels of your car, if it’s great you can reassemble the set, otherwise tighten again the tightening screws until you get a great optimal setting
.
If you don’t have access to the handbrake flap of the Audi Rs4, the adjustment will probably be precisely the same but it surely will be done by passing beneath your car at the level of your handbrake handle. Remember to set your car on the stand ahead of any action.
How do I adjust the automatic handbrake of my Audi Rs4?
Second approach to handbrake adjustment upon Audi Rs4 , this is an automatic handbrake, in contrast to the manual one, this method is done upon the brake drums or calipers, which is imagined to adjust automatically to the wear of the brake shoes or disc brake pads. It may be that if you soon have to get brake pads, your handbrake will suffer power, allow me to share the steps to take to check if the strain of your handbrake is the appropriate one:
- Realize that an automatic handbrake can’t be adjusted directly because it is supposed to adapt on its own to the don of the disc brake pads or pads of your Audi Rs4.
- You can even now check that the system is working correctly by simply putting the car on the stand and checking by driving under the car that the brake pads are still in good working order.
- For drum brakes will probably be necessary to disassemble the brake systems to check the state of the shoes, we recommend you to have it done by a professional.
- Be sure you change your disc brake pads if you need to.
What is the cost of adjusting the handbrake of Audi Rs4 by a professional?
Finally, if you do not feel comfortable with this procedure, specifically since it questions a safety component of your car, namely the adjustment on the handbrake of the Audi Rs4 , we give you advice to go to a mechanic who are able to adjust your handbrake for the about fifty euros . For those who have problems with vibrations when braking on Audi Rs4, do not hesitate to consult our document which refers to this issue.
If you need more tutorials on the Audi Rs4, go to our Audi Rs4 category.
