Car mirrors are one of the most vital security features that you have to always make certain are working properly, because it is your safety, the safety of other road users and your finances because you can be fined if you have a faulty mirror. This is the circumstance that interests us in this article, you have dealt with a crash, one of your side mirrors is damaged and you are now wondering how to change a side mirror on your Mercury Milan? You are at the right spot, we will detail all the procedures to help you replace it accurately. To begin, we’ll examine what attracts you here, how to change a complete side mirror on your Mercury Milan, and then how to replace only the mirror glass.
How to replace a complete side mirror on my Mercury Milan?
Let’s go, we start this guidebook with the part that likely concerns you the most, how to replace a side mirror on my Mercury Milan? This operation is very simple and you should be able to do it without help with a minimum amount of tooling. You will just need to take off the plastic cover inside your car’s interior, it is generally clipped on the door. For power mirrors, make sure unplug the power connector that you will see behind the cover. Finally, you will have to unscrew the screws that hold the mirror, in general there are three, a simple screwdriver should do the trick to allow you to pass this step of changing the side mirror of your Mercury Milan. Make sure to keep the mirror on the outside of your vehicle when unscrewing the last screw, so that it does not drop out. Finally to install your new side mirror, you will only have to fit the new one in the 3 screw axes, screw it back in, reconnect the electricity if it is electric and finally reposition the plastic cover. That’s it, you’ve just learned how to replace the side mirror of your Mercury Milan, you see it wasn’t that hard to do.
How do you just replace the window of the side mirror of my Mercury Milan?
If perhaps you simply want to replace the window of the side mirror of your Mercury Milan, you will initially need to determine the type of locking of your mirror. To accomplish this, the most basic methodology is to look at the fixing system on the replacement glass.
Side mirror glass replacing: tongue-locking glass
- If you want to replace the side mirror glass of your Mercury Milan and it uses a tongue and groove system, you are lucky, it is the least complicated system to take off. All you have to do is to use a plastic object to take off the window “by force”.
- To put it back in place, do the same and push it back right into place with force. To check that it is perfectly installed, move it around.
Side mirror glass replacing: metal spring locking glass
-
- With this locking system, to replace the side mirror glass of your Mercury Milan you will have to locate the locking spring, turn the glass in the opposite way to give you access to it, disassemble it.
- Make sure to keep the spring because it is possible that you have not one supplied it with your new window, change it on your new window, take apart the old one paying attention to the electric cables in case of defrosting system
.
- Stick to the positioning guide (notch) and gently push it into its housing so as not to break it. Verify that it is well installed by moving it around.
Side mirror glass replacing: swivel tray locking glass
-
- You can find the position of the swivel plate of the window to be changed on the side mirror of your Mercury Milan, generally it is at the bottom behind the window
.
- Turn the glass in the opposite way to give you less difficult access to the device and using a screwdriver, rotate the mechanism.
- If your mirror is equipped with a defrosting system, do the reverse operation to reattach it and check that it is perfectly placed.
To find more tips on the Mercury Milan, take a look at the Mercury Milan category.
