Vehicle mirrors are one of the most crucial safety features that you have to constantly be sure are functioning properly, because it is your safety, the safety of other road users and your budget because you can be fined if you have a defective side mirror. This is the circumstance that interests us on this page, you have suffered a crash, one of your mirrors is damaged and you are now wondering how to change a side mirror on your Acura TL? You are at the right spot, we will detail all the procedures to help you change it in the right way. To begin, we’ll look at what attracts you on this page, how to change a complete side mirror on your Acura TL, and then how to change only the mirror glass.
How to change a complete side mirror on my Acura TL?
Let’s go, we start this guide with the part that most certainly concerns you the most, how to change a side mirror on my Acura TL? This operation is very simple and you should be competent to do it on your own with a minimum of tooling. You will just need to take out the plastic cover inside your car’s interior, it is usually clipped on the door. For power mirrors, be sure to unplug the power connector that you will see in back of the cover. At last, you will have to unscrew the screws that hold the mirror, commonly there are three, a simple screwdriver should do just fine to enable you to pass this step of changing the side mirror of your Acura TL. Make sure you keep the mirror on the outside of your car when unscrewing the last screw, so that it does not fall out. Finally to install your new side mirror, you will simply have to fit the new one in the 3 screw axes, screw it back in, reconnect the electricity if it is electric and to finish put back the plastic cover. That’s it, you’ve just discovered how to change the side mirror of your Acura TL, you see it wasn’t that difficult.
How do you just change the window of the side mirror of my Acura TL?
If perhaps you only want to change the window of the side mirror of your Acura TL, you will initially need to discern the type of locking of your mirror. To achieve this, the easiest technique is to check out the fixing system on the replacement glass.
Side mirror glass replacing: tongue-locking glass
- If you want to change the side mirror glass of your Acura TL and it uses a tongue and groove system, you are fortunate people, it is the least complicated unit to take out. All you have to do is to use a plastic thing to take out the window “by force”.
- To put it back in place, do the same and push it back in place with force. To check that it is well installed, move it around.
Side mirror glass replacing: metal spring locking glass
-
- With this locking system, to change the side mirror glass of your Acura TL you will need to identify the locking spring, turn the glass in the opposite direction to give you access to it, disassemble it.
- Make sure you keep the spring because it is possible that you have not one provided it with your new window, change it on your new window, dismantle the old one paying attention to the electric cables in the event of defrosting system
.
- Follow the positioning guide (notch) and smoothly push it into its housing so as not to break it. Check that it is well installed by moving it around.
Side mirror glass replacing: swivel tray locking glass
-
- You can find the position of the swivel plate of the window to be changed on the side mirror of your Acura TL, in most cases it is at the bottom behind the window
.
- Turn the glass in the opposite direction to give you much easier access to the device and using a screwdriver, rotate the system.
- If your mirror is equipped with a defrosting system, do the reverse operation to reattach it and check that it is well fixed.
To get more tips on the Acura TL, take a look at the Acura TL category.
