It’s hardly ever a good sign that the engine in your Ford Puma is behaving unusually. This is because the engine is the most important part of your car and any indicator of abnormal functioning must be detected right away and you must search for the cause of the malfunction. If it occurs that your Ford Puma is hesitating during acceleration, we have done this tutorial to help you uncover the cause of your malfunction. We will now examine all the possible motives your Ford Puma having hesitation in acceleration.
Ford Puma WHICH hesitates while accelerating RESULTING FROM THE IGNITION:
So let’s commence our list of the motives that can cause hesitation during Ford Puma acceleration. One of the most simple motives is that your ignition breaks down. We speak about ignition, but we can also extend to the malfunction to the ECU which on its own can give bad information that will affect your ignition. It’s likely that your Ford Puma a has gone limp mode, don’t hesitate to go through this tutorial for more information. In order to verify that one of these malfunctions is not the provoke of your Ford Puma having acceleration troubles, you will have to “suitcase” your car. Also, you can examine the state of your ignition coils, if you have more than one and one is defective it may be the cause for the couplings, acceleration holes that you feel, if you only have one most of the time your Ford Puma should not start.
Hesitation during Ford Puma acceleration AS A RESULT OF THE INJECTORS:
Now let’s concentrate on the injector-related mishaps of your Ford Puma’s fuel injectors. If you notice this sense that your car is grazing, it is quite possible that due to poor fuel quality one or more of your injectors have become blocked or obstructed, generating a bad air/fuel mixture to be sent to the engine block and therefore immediately affect its normal performance, do not fail to verify your injectors. If during the test you find that one of your injectors is leaking on your Ford Puma, please go through our small document to remedy this malfunction.
Hesitation during Ford Puma acceleration AS A RESULT OF THE ACCELERATOR CABLE:
Another possible reason why you experience hesitation during Ford Puma acceleration, whether you are driving, stationary, hot, cold or accelerating, is that your throttle cable is severely worn. If your accelerator cable is in a serious state of wear, it will not slide properly in its sheath and will snap, verify the level of wear of your accelerator cable.
Ford Puma that hesitates when accelerating RESULTING FROM THE FUEL FILTER:
As much as the fuel filter is concerned, we’re struggling with the same form of issue as clogged injectors. If your Ford Puma is clutching and you experience like it is grazing or you have holes when accelerating, your fuel filter may be clogged. The final result would be that your whole intake system would be running at idle and therefore your engine would lack fuel supply to go normally. Don’t forget to verify it and replace it if necessary. If you ever get the feeling that your Ford Puma is going up in laps by itself, go through our tutorial it should help you to identify the cause.
Hesitation during Ford Puma acceleration AS A RESULT OF THE PARTICULATE FILTER:
The ultimate justification for an hesitating Ford Puma during acceleration. Modern cars are built with an increasing number of options to limit emissions, the particulate filter is part of this package. Nevertheless, depending on how you use it, it can become clogged and dirty. Specifically if you drive short distances and don’t push your engine hard very often. If this is the case, it is possible that your ACP could become clogged and your Ford Puma could give you acceleration concerns. Have it inspected.
Hesitation during Ford Puma acceleration RESULTING FROM A PUNCTURED HOSE:
To conclude, the last issue, and surely the least frustrating for you, it is likely that one of your fuel or air intake hoses is punctured or cracked and that it motives a lack of air or fuel which will result in an Ford Puma that gives acceleration troubles, verify under your hood, engine on, the level of wear of your hoses, be careful not to burn yourself. If this happens to you, your Ford Puma may not be able to idle, in which case examine our little article to fix the malfunction in depth.
To find more tips on the Ford Puma, take a look at the Ford Puma category.
