Do you have the feeling of a power drop without any reasonable explanation, and all this comes about in an unknown or usual way? Maybe it’s because your Ford Edge is going to limp mode . The fact is, the safety mode can be activated on a car for a number of causes and the activation of this mode will set the engine’s behavior, often leading to a momentary or irrevocable loss of power from your Ford Edge until you fix the issue. Our publishers wanted to compose this guidebook so that you can fix this matter, which is very embarrassing and can be dangerous for you and the rest of the car owners. In order to resolve these concerns, we will concentrate on the limp mode of your Ford Edge. And secondly, what are the causes why your Ford Edge goes into safety mode?
Ford Edge THAT GOES TO limp mode: WHAT IS IT?
Let’s start our content with the definition of your Ford Edge that goes to limp mode . You most likely won’t have any information about the fact that this mode has been switched on and you will simply feel the results. Generally the clues of a safety mode on your Ford Edge will be that you will identify an identifiable loss of power, you should not be able to exceed 3000 rpm which makes the use of your Ford Edge more than difficult. In addition to the power loss, you may have an amber warning light on your speedometer which will appear on the dash to suggest that you go to your auto technician to deal with the issue as fairly quickly as possible. In fact, via your vehicle’s ECU and the various sensors that continuously monitor the operation of your engine, your Ford Edge that goes to security is in reality a sort of electronic flange of your engine. On the other hand, you must be worried about this fairly quickly because it most likely hides a concern that needs to be dealt with, nevertheless, specifically with time, certain components such as the EGR valve, the catalytic converter or the particle filter will become clogged and will age much more fairly quickly. In some scenarios, simply turning your Ford Edge off and on again will be enough to turn off the safety mode, in other situations the original concern must be resolved to return to regular behaviour.
Why is my Ford Edge going into limp mode?
Now we’re going to outline the causes why your Ford Edge is on limp mode. To begin with you can easily check whether this is the case by using your diagnostic plug and Ford Edgereading the fault codes of your Ford Edge. Please have a check out our dedicated article which explains you how to use these tools and interpret the fault codes of your Ford Edge yourself. You should find out a fault code displayed caused by an engine component. Based on the finish of your car the on-board computer will as well tell you that you are in safety mode. We will then discover most of the parts that can make your Ford Edge safe.
- Turbo: A defective turbo will instantly notify your computer and make your car safe.
- The EGR valve: If your car is ever used in a really quiet method or just for short trips at low speed, it will often clog up and trigger the safety mode to be activated.
- The Particle Filter: A part famous for the complications it causes, in the event that your PAP is clogged, you will be subject to a safety shutdown of your Ford Edge simply because your engine will not be able to properly exhaust the exhaust gases.
- The flow meter: At last, the flow meter is the last of the established causes of an Ford Edge going into safety. In fact, if it doesn’t manage the air/fuel mixture properly, your ECU will know the problem instantly.
In case you have any other worries or questions about your car, you can certainly find the solution in our Ford Edge Guide.
If you want more guides on the Ford Edge, go to our Ford Edge category.