The engine of your car is elaborate, it is not always easy to read all the signs it sends us. On the other hand, it is absolutely important to try to stay on alert for the slightest sign of weakness in your car to limit the risk of serious problems. If you have the sense that your clutch is slipping on your Kia Rio 3, you’re right to have started examining. It’s a defect that must be taken into account fairly quickly, otherwise you could end up with an unusable car. To help you in your approach our team has chose to write this guide which should allow you to see more clearly and make the right choice to avoid aggravating the issue and make sure that it is indeed the trouble you are victim of. To accomplish this, we will first take a look at what a slipping clutch on Kia Rio 3 is and how to check that this is what is happening to you, and then, what measures can be taken to correct the issue.
What is slipping clutch on Kia Rio 3 and how to spot it?
A Kia Rio 3 with a clutch that slips
The clutch of your Kia Rio 3 is the component that permits your car to change gears. It is placed between your gearbox and your engine. It is the component that comes into contact with the flywheel which is located on the engine side and which will collect the power transmitted by the clutch. With wear, the clutch of your Kia Rio 3 slips because it is made up of notches that engage in the flywheel, and with wear and friction it wears out. It is said that the clutch slips when its teeth are too damaged for it to engage on the flywheel.
How to spot clutch slipping on an Kia Rio 3?
There are different techniques to find out that the clutch of your Kia Rio 3 is slipping. You can perform all of these tests yourself.
You can simply find out that your clutch slips when you accelerate and your engine revs up, but your car does not speed up, you may also experience a burning smell.
To validate the first observation, you can stop, pull the hand brake, engage the first one, accelerate reasonably by releasing the clutch of your vehicle softly, in the event that your engine rises in revs but the Kia Rio 3 keeps fixed it is the sign of a dead clutch.
Finally, you can put yourself, still in third gear, with the handbrake on, and by releasing it, your car should stall, if not, your clutch is probably dead.
What should I do when my clutch slips on my Kia Rio 3?
Some advices to avoir the wear of your Kia Rio 3 clutch
We will now give you some suggestions to limit the wear of your clutch and avoid your clutch slipping on your Kia Rio 3. Firstly, it is wise not to leave your foot on the clutch pedal, whether or not the pressure you apply is very light you will pre wear the clutch release bearing which will sooner or later result in a complete change of the clutch kit. An additional point not to be omitted, do not over-accelerate when you start, your acceleration must always be adapted to the velocity of your engine. In the event you are at a standstill accelerate slowly, if you are at medium speed accelerate gradually when you release the clutch pedal of your car so as not to make it slip against your engine flywheel.
Replacing your Kia Rio 3 clutch
Finally, in this last part, we will talk about the repair part. In circumstance the clutch of your Kia Rio 3 is useless, you might be stuck at a standstill and have no other solution than to call the tow truck, because a dead clutch no longer allows the transmission to transmit power to the wheels. If this is the circumstance, be aware that you will have to replace the complete clutch kit, this repair needs quite a few hours of work and is estimated to cost between 500 and 1200 euros based on the engine and the garage.
If perhaps you have any additional questions about the Kia Rio 3, do not hesitate to consult our Kia Rio 3 category.
