Facing problems on your vehicle is specially irritating, in addition to the economic side that these concerns signify, one must also add the time lost with a non-operational Renault Kangoo 2 and the time spent to establish and solve the malfunction. Nevertheless, some problems are less severe than others, which is not to say that they do not get worried us. In this article we are going to seek out a trouble that can affect many of us, perceiving vibrations at acceleration on Renault Kangoo 2. This trouble can sometimes be hard to perceive but it must be handled. We will consequently begin our article content with the roots of these vibrations on Renault Kangoo 2, then, with the solutions you have to reduce or stop these tremors.

acceleration-vibrations-renault-kangoo-2

Why does my Renault Kangoo 2 emit vibrations when accelerating?

So let’s begin our article content with the roots of this type of trouble on your car. You should already know that an engine, especially if it is ancient or if it has been driven quite a lot, can naturally vibrate without being a trouble behind it. Large diesel engines, especially those with a lot of torque, can bring about this kind of discomfort, both at idle and when accelerating.

I feel vibrations on my Renault Kangoo 2 only when accelerating

Let’s take the most interesting case for us in this article content. The simple fact that you come to feel trembling on your Renault Kangoo 2 during your acceleration periods, in this circumstance you will have to examine the condition of some elements because several of elements can be at the source of these vibrations and whether or not you are unfortunate a mix of several of them may also be possible, here is the list of parts that can be involved.

  • Turbo: If the turbo of your Renault Kangoo 2 is defective, it may bring about vibrations that you will feel when you accelerate at the moment it is running.
  • The turbo pressure sensor: This sensor will control the pressure exerted in the turbo of your car, if it fails it may affect the behavior of your turbo and create vibrations that you may experience during acceleration of your Renault Kangoo 2.

    • .

  • If the turbo is punctured or damaged, the consequence will be alike, the power supply of your turbo will be disturbed and its behavior too. Make sure visually verify their state.

I’m feeling vibrations on my Renault Kangoo 2 at acceleration and deceleration

We will now look into the situation where you experience vibrations on your Renault Kangoo 2 when you are accelerating but also when you are idling. If you only experience vibrations when you are idling on your Renault Kangoo 2, please read our article content focused upon this trouble to fix your problem. If, however, you realize that your Renault Kangoo 2 vibrates when accelerating but also when it is stopped, here is the list of components to verify:

  • EGR valve: In fact this valve which manages the return of exhaust gases for pollution standards can become dirty and affect the evacuation of exhaust gases which can bring about Renault Kangoo 2 vibrates when accelerating but also when stopped.
  • Injectors: Your injectors that control the fuel/air mixture flow may be dirty or damaged, which will generate the wrong amount of mixture and thus prevent your engine block from working effectively, it is even possible that one or more of your cylinders are not running properly.
  • Fuel Filter: Like the injectors, if the filter is blocked it will not let the fuel pass properly and therefore affect the operation of your Renault Kangoo 2, up to the point of causing vibrations during acceleration.

Here are the most important motives of a Renault Kangoo 2 that vibrates at acceleration

What can I do to stop the vibration when I accelerate on my Renault Kangoo 2? What can I do?

Finally, in this last part, we will give you the answers available to you to get over these tremors on your car when you accelerate. Here is the best attitude to adopt based on the part that is affected:

  • Turbo: If your turbo starts all these vibrations when you accelerate your Renault Kangoo 2, it will be good for you to control all the parts linked to it because changing a complete turbo is a big budget and typically the trouble does not come exclusively from the turbo. So make sure you take a look at your turbo pressure sensor, your flowmeter, the EGR valve and the hoses of your turbo. Otherwise take your Renault Kangoo 2 to your workshop.
  • EGR valve: The EGR valve has the advantage that it is often easy to access and easy to take apart/clean. You can always look into it and clean it, for this see our article content on cleaning the EGR valve of an Renault Kangoo 2.
  • Injectors: Injectors are very sensitive parts and a few harmful particles may be enough to affect their operation. Use a fuel additive to simply clean the injectors, if this is not enough you will have to go to a specialist.
  • Fuel Filter: If it is the fuel filter, just change it. A fuel filter doesn’t clean itself, so if it is clogged you will simply have to replace it with a new one.

Now you have all the info you need to discover the origin of the vibrations at acceleration on your Renault Kangoo 2. If you don’t feel able to conduct certain operations don’t hesitate to go to your technician.

If you wish more tutorials on the Renault Kangoo 2, go to our Renault Kangoo 2 category.