Encountering problems on your vehicle is extremely annoying, furthermore the economic side that these problems represent, one must also add the time lost with a non-operational Peugeot Bipper and the time spent to identify and fix the breakdown. However, some problems are less serious than others, which is not to say that they do not stress us. On this page we are going to take a look at a problem that can occur to many of us, feeling vibrations at acceleration on Peugeot Bipper. This problem can in some cases be hard to perceive but it must be looked after. We will so commence our article content with the roots of these vibrations on Peugeot Bipper, then, with the solutions you have to reduce or stop these tremors.

acceleration-vibrations-peugeot-bipper

Why does my Peugeot Bipper release vibrations when accelerating?

So let’s commence our article content with the roots of this kind of problem on your car. You should already know that an engine, specifically if it is ancient or if it has been driven quite a lot, can naturally vibrate without being a problem behind it. Large diesel engines, specifically those with a lot of torque, can generate this kind of sensation, both at idle and when accelerating.

I feel vibrations on my Peugeot Bipper only when accelerating

Let’s take the most interesting case for us in this article content. The simple fact that you experience trembling on your Peugeot Bipper during your acceleration periods, in this situation you will have to verify the state of different components because several of elements can be at the origin of these vibrations and whether or not you are unlucky a combination of several of them may also be possible, here is the list of parts that can be concerned.

  • Turbo: If the turbo of your Peugeot Bipper is defective, it may generate vibrations that you will come to feel when you accelerate at the moment it is activated.
  • The turbo pressure sensor: This sensor will control the pressure exerted in the turbo of your car, if it fails it may disrupt the performance of your turbo and deliver vibrations that you may feel during acceleration of your Peugeot Bipper.

    • .

  • If the turbo is punctured or injured, the effect will be alike, the power supply of your turbo will be disrupted and its performance too. Make sure you visually examine their condition.

I’m feeling vibrations on my Peugeot Bipper at acceleration and deceleration

We will now look into the scenario where you feel vibrations on your Peugeot Bipper when you are accelerating but also when you are idling. If you only feel vibrations when you are idling on your Peugeot Bipper, please read our article content focused upon this problem to fix your problem. If, however, you identify that your Peugeot Bipper vibrates when accelerating but also when it is stopped, here is the list of components to examine:

  • EGR valve: Indeed this valve which manages the return of exhaust gases for pollution standards can become dirty and disturb the evacuation of exhaust gases which can generate Peugeot Bipper vibrates when accelerating but also when stopped.
  • Injectors: Your injectors that regulating the fuel/air mixture flow may be dirty or damaged, which will bring out the wrong amount of mixture and thus prevent your engine block from working properly, it is even possible that one or more of your cylinders are not running correctly.
  • Fuel Filter: Like the injectors, if the filter is blocked it will not let the fuel pass correctly and therefore disturb the performance of your Peugeot Bipper, up to the point of producing vibrations during acceleration.

Here are the main causes of a Peugeot Bipper that vibrates at acceleration

What can I do to stop the vibration when I accelerate on my Peugeot Bipper? What can I do?

To conclude, in this last section, we will give you the possibilities available to you to overcome these tremors on your car when you accelerate. Here is the best attitude to adopt based on the part that is involved:

  • Turbo: If your turbo starts all these vibrations when you accelerate your Peugeot Bipper, it will be good for you to control all the parts connected to it because changing a complete turbo is a big budget and generally the problem does not come exclusively from the turbo. So be sure to examine your turbo pressure sensor, your flowmeter, the EGR valve and the hoses of your turbo. Otherwise take your Peugeot Bipper to your garage area.
  • EGR valve: The EGR valve has the benefit that it is generally easy to access and simple to take apart/clean. You can always look into it and clean it, for this see our article content on cleaning the EGR valve of an Peugeot Bipper.
  • Injectors: Injectors are very sensitive parts and a few impurities may be enough to disturb their performance. Use a fuel additive to simply clean the injectors, if this is not enough you will have to go to a specialist.
  • Fuel Filter: If it is the fuel filter, only change it. A fuel filter doesn’t clean itself, so if it is clogged you will only have to replace it with a new one.

Now you have all the information you need to discover the source of the vibrations at acceleration on your Peugeot Bipper. If you don’t feel able to do certain procedures don’t hesitate to go to your motor mechanic.

In the event that you have any additional questions about the Peugeot Bipper, do not hesitate to consult our Peugeot Bipper category.