Keeping an eye on your vehicle is essential in these days, in truth, if you do not do the minimum service of it, or if you do not take into account signs of abnormality, you highly risk to observe your car withering away. This is precisely the topic we are going to talk about today, one of the indications that most perturbs motorists is the ABS warning light on Mazda Mx5. In an attempt to help you review this warning light, we will first take a look at what this ABS warning light corresponds to, then in a second what you can do if the ABS light is on Mazda Mx5?.

abs-light-stays-on-mazda-mx5

What does the ABS light on Mazda Mx5 mean?

We will begin our article content with the definition of an ABS warning light on Mazda Mx5, to do this, in first, we will find out what an ABS is, and later on, why the ABS light on your car lights up.

What is the ABS on Mazda Mx5?

First of all, it is essential to demonstrate to you what the ABS of your Mazda Mx5 is utilized for so that you can understand the rest of this article content. The ABS (Anti-lock Braking System) is a system that prevents the wheels of your car from locking during braking. The aim of this system is to optimize the braking distance of a car by preventing the wheels from locking, sliding on the road and you losing control of your car. The ABS system of your Mazda Mx5 is made from different parts, here they are:

  • Speed sensors on each wheel, which will examine if one of the wheels locks up.
  • A hydraulic system and valves that will control the pressure of the pads on the discs to control the braking power of the car
  • A computer that is the control center of your entire ABS system as well as the ABS light of your Mazda Mx5

.
In fact, you can with ease experience how your car’s ABS works. If you have to steer, you will find that your car will brake by pawing, this is exactly the actions that ABS allows, it will optimise braking to the maximum by linking the phases of pressure on the brake discs and the phases of discharge to prevent the wheels from locking up.

Meaning of an ABS light on Mazda Mx5

Now we move on to the section that you are most certainly more enthusiastic about, meaning of an ABS warning light on a Mazda Mx5? Firstly, it is an orange light, so if it is on it means that your ABS system is defective. You should be knowledgeable that once the ABS warning light is on, the ABS will be put into safety mode, so you should adapt your driving and not take any risks. Here are the different problems that the ABS warning light on your Mazda Mx5 can indicate:

  • It could be a simple short circuit, a broken wiring harness, a defective relay or fuse. Use a pressure gauge to verify it.
  • A malfunctioning ABS sensor: A malfunction of one of them motives the ABS light on your Mazda Mx5 to come on
  • The ABS hydraulic block of your Mazda Mx5: If it is defective it is possible that the indicator light will turn on and you will no longer be able to use your ABS.
  • The ABS computer: If the computer has a trouble, being the center of all decisions made to manage your ABS, the light will inevitably come on.

What if the ABS light activate on my Mazda Mx5?

We will now move on to the section where we will try to give you some solutions to shut off this light, and thus answer the following question, what to do if the ABS light is on on my Mazda Mx5?. The solutions will rely upon the failures you are going through. Firstly, pass your Mazda Mx5 to the diagnostic tool, if you don’t know how to read a fault code on Mazda Mx5, don’t hesitate to read our article content which points the steps to take. Once you have uncovered the source of your problem, here are the steps to take to solve it and turn off the ABS light on your Mazda Mx5:

  • Trouble of the ECU or the hydraulic block: It can only be adjusted, and in this situation, you will have to go through a specialist, but if it’s dead, it could cost you around 1000€ to replace the ECU and 1500 to 2000€ if you have to replace both of them.
  • Electrical problem: Once you’ve detected an electrical problem with your manometer, if it’s only a fuse or a relay, count around 10€ maximum, in any other case you’ll have to repair the wiring harness.
  • A defective sensor: Occasionally a simple cleaning of the sensors will be enough to solve the problem, in any other case changing a sensor can cost up to a few hundred euros.

In the event that you have any further questions about the Mazda Mx5, do not hesitate to consult our Mazda Mx5 category.