Monitoring your car is important in these modern times, in reality, if you do not do the minimum service of it, or if you do not take into account signals of abnormality, you strongly risk to observe your car withering away. This is specifically the topic we are going to talk about today, one of the indicators that most disturbs drivers is the ABS warning light on Hyundai Kona. In an attempt to help you analyze this warning light, we will first look at what this ABS warning light corresponds to, then in a second what to do if the ABS light is on Hyundai Kona?.

abs-light-stays-on-hyundai-kona

What does the ABS light on Hyundai Kona signify?

We will commence our content page with the meaning of an ABS warning light on Hyundai Kona, for this, in first, we will see what an ABS is, and later on, why the ABS light on your car lights up.

What is the ABS on Hyundai Kona?

First of all, it is fundamental to describe to you what the ABS of your Hyundai Kona is used for so that you can understand the rest of this content. The ABS (Anti-lock Braking System) is a device that prevents the wheels of your car from locking during braking. The aim of this system is to optimize the braking distance of a car by preventing the wheels from locking, sliding on the road and you losing control of your car. The ABS system of your Hyundai Kona is composed of several parts, here they are:

  • Speed sensors on each wheel, which will evaluate if one of the wheels locks up.
  • A hydraulic system and valves that will manage the pressure of the pads on the discs to manage the braking power of the car
  • A computer that is the control center of your entire ABS system as well as the ABS light of your Hyundai Kona

.
The truth is, you can simply experience how your car’s ABS works. If you have to steer, you will find that your car will brake by pawing, this is exactly the actions that ABS permits, it will optimise braking to the maximum by relating the phases of pressure on the brake discs and the phases of release to prevent the wheels from locking up.

Meaning of an ABS light on Hyundai Kona

Now we proceed to the part that you are probably more enthusiastic about, meaning of an ABS warning light on a Hyundai Kona? To begin with, it is an orange light, so if it is on it suggest that your ABS system is defective. You should be knowledgeable that whenever the ABS warning light is on, the ABS will be put into security mode, so you should adapt your driving and not take any risks. Here are the different problems that the ABS warning light on your Hyundai Kona can indicate:

  • It could be a simple short circuit, a damaged wiring harness, a defective relay or fuse. Use a pressure gauge to verify it.
  • A malfunctioning ABS sensor: A breakdown of one of them triggers the ABS light on your Hyundai Kona to come on
  • The ABS hydraulic block of your Hyundai Kona: If it is defective it is possible that the indicator light will occur and you will no longer be able to use your ABS.
  • The ABS computer: If the computer has a trouble, being the center of all decisions made to manage your ABS, the light will undoubtedly come on.

What if the ABS light turns on on my Hyundai Kona?

We will now proceed to the part where we will try to give you some answers to turn off this light, and thus answer the following question, what to do if the ABS light is on on my Hyundai Kona?. The answers will be contingent on the deficiencies you are enduring. To begin with, pass your Hyundai Kona to the diagnostic tool, if you don’t know how to read a fault code on Hyundai Kona, don’t hesitate to examine our content which points the steps to take. Once you have uncovered the cause of your trouble, here are the steps to take to fix it and turn off the ABS light on your Hyundai Kona:

  • Issue of the ECU or the hydraulic block: It can only be altered, and in this situation, you will have to go through a professional, but if it’s dead, it could cost you around 1000€ to change the ECU and 1500 to 2000€ if you have to change both of them.
  • Electrical trouble: Once you’ve identified an electrical trouble with your manometer, if it’s only a fuse or a relay, count around 10€ maximum, otherwise you’ll have to repair the wiring harness.
  • A defective sensor: In some cases a simple cleaning of the sensors will be enough to fix the trouble, otherwise changing a sensor can cost up to a few hundred euros.

If you need more tutorials on the Hyundai Kona, go to our Hyundai Kona category.