Monitoring your car is very important in these days, in truth, if you do not do the minimum service of it, or if you do not take into account signs of abnormality, you highly risk to see your car getting in bad conditions. This is precisely the theme we are gonna talk about today, one of the symptoms that most disturbs drivers is the ABS warning light on Audi Q2. In an attempt to help you analyze this warning light, we will first check out what this ABS warning light corresponds to, then in a second what you can do if the ABS light is on Audi Q2?.
What does the ABS light on Audi Q2 mean?
We will commence our paper with the definition of an ABS warning light on Audi Q2, to do this, in first, we will discover what an ABS is, and next, why the ABS light on your car lights up.
What is the ABS on Audi Q2?
To begin with, it is fundamental to describe to you what the ABS of your Audi Q2 is intended for so that you can understand the remaining of this content page. The ABS (Anti-lock Braking System) is a device that prevents the wheels of your car from locking during braking. The purpose of this system is to optimize the braking distance of a car by preventing the wheels from locking, sliding on the road and you losing control of your car. The ABS system of your Audi Q2 is consisting of several components, here they are:
- Speed sensors on each wheel, which will evaluate if one of the wheels locks up.
- A hydraulic system and valves that will control the pressure of the pads on the discs to control the braking power of the car
- A computer that is the control center of your entire ABS system as well as the ABS light of your Audi Q2
.
The truth is, you can very easily experience how your car’s ABS works. If you have to steer, you will find that your car will brake by pawing, this is precisely the actions that ABS enables, it will optimise braking to the maximum by associating the phases of pressure on the brake discs and the phases of release to prevent the wheels from locking up.
Meaning of an ABS light on Audi Q2
Now we proceed to the part that you are most likely more interested in, meaning of an ABS warning light on a Audi Q2? Firstly, it is an orange light, so if it is on it suggest that your ABS system is faulty. You should be knowledgeable that as soon as the ABS warning light is on, the ABS will be put into safety mode, so you should adjust your driving and not take any risks. Here are the different problems that the ABS warning light on your Audi Q2 can alert:
- It could be a simple short circuit, a damaged wiring harness, a faulty relay or fuse. Use a pressure gauge to examine it.
- A malfunctioning ABS sensor: A breakdown of one of them causes the ABS light on your Audi Q2 to turn on
- The ABS hydraulic block of your Audi Q2: If it is faulty it is possible that the indicator light will turn on and you will no longer be able to use your ABS.
- The ABS computer: If the computer has a problem, being the center of all decisions made to operate your ABS, the light will obviously turn on.
What if the ABS light activate on my Audi Q2?
We will now proceed to the part where we will try to give you some solutions to switch off this light, and thus answer the following question, what to do if the ABS light is on on my Audi Q2?. The solutions will could depend on the deficiencies you are going through. Firstly, pass your Audi Q2 to the diagnostic tool, if you don’t know how to read a fault code on Audi Q2, don’t think twice to read our content page which points out the steps to take. Once you have located the cause of your issue, here are the steps to take to solve it and turn off the ABS light on your Audi Q2:
- Problem of the ECU or the hydraulic block: It can only be adjusted, and in this situation, you will have to go through a specialist, but if it’s dead, it could cost you around 1000€ to change the ECU and 1500 to 2000€ if you have to change both of them.
- Electrical issue: Once you’ve spotted an electrical issue with your manometer, if it’s only a fuse or a relay, count around 10€ maximum, in any other case you’ll have to repair the wiring harness.
- A faulty sensor: Occasionally a simple cleaning of the sensors will be enough to get rid of the issue, in any other case changing a sensor can cost up to a few hundred euros.
To discover more tips on the Audi Q2, take a look at the Audi Q2 category.
