Watching your automobile is imperative in these modern times, in fact, if you do not do the minimum service of it, or if you do not take into account signs of abnormality, you strongly risk to observe your car withering away. This is exactly the subject we are gonna discuss in this article, one of the symptoms that most perturbs drivers is the ABS warning light on CUPRA FORMENTOR. In an attempt to help you review this warning light, we will first look at what this ABS warning light corresponds to, then in a second what to do if the ABS light is on CUPRA FORMENTOR?.

abs-light-stays-on-cupra-formentor

What does the ABS light on CUPRA FORMENTOR mean?

We will begin our paper with the meaning of an ABS warning light on CUPRA FORMENTOR, for this, in first, we will discover what an ABS is, and soon after, why the ABS light on your car lights up.

What is the ABS on CUPRA FORMENTOR?

To start with, it is fundamental to describe to you what the ABS of your CUPRA FORMENTOR is utilized for so that you can understand the remaining of this content. The ABS (Anti-lock Braking System) is a system that prevents the wheels of your car from locking during braking. The goal of this system is to lower the braking distance of a car by preventing the wheels from locking, sliding on the road and you losing control of your car. The ABS system of your CUPRA FORMENTOR is made up of several parts, here they are:

  • Speed sensors on each wheel, which will analyze if one of the wheels locks up.
  • A hydraulic system and valves that will manage the pressure of the pads on the discs to manage the braking power of the car
  • A computer that is the control center of your entire ABS system as well as the ABS light of your CUPRA FORMENTOR

.
The truth is, you can with ease come to feel how your car’s ABS works. If you have to steer, you will find that your car will brake by pawing, this is exactly the actions that ABS allows, it will optimise braking to the maximum by relating the phases of pressure on the brake discs and the phases of discharge to prevent the wheels from locking up.

Meaning of an ABS light on CUPRA FORMENTOR

Now we move on to the part that you are most likely more enthusiastic about, meaning of an ABS warning light on a CUPRA FORMENTOR? Firstly, it is an orange light, so if it is on it means that your ABS system is defective. You should be informed that once the ABS warning light is on, the ABS will be put into safety mode, so you should adapt your driving and not take any risks. Here are the different problems that the ABS warning light on your CUPRA FORMENTOR can alert:

  • It could be a simple short circuit, a broken wiring harness, a defective relay or fuse. Use a pressure gauge to examine it.
  • A malfunctioning ABS sensor: A breakdown of one of them causes the ABS light on your CUPRA FORMENTOR to come on
  • The ABS hydraulic block of your CUPRA FORMENTOR: If it is defective it is possible that the indicator light will come on and you will no longer be able to use your ABS.
  • The ABS computer: If the computer has a trouble, being the center of all decisions made to operate your ABS, the light will inevitably come on.

What if the ABS light turns on on my CUPRA FORMENTOR?

We will now move on to the part where we will try to give you some solutions to switch off this light, and thus answer the following question, what to do if the ABS light is on on my CUPRA FORMENTOR?. The solutions will could depend on the failure you are experiencing. Firstly, pass your CUPRA FORMENTOR to the diagnostic tool, if you don’t know how to read a fault code on CUPRA FORMENTOR, don’t be reluctant to examine our content which points the steps to take. Once you have uncovered the source of your problem, here are the steps to take to resolve it and turn off the ABS light on your CUPRA FORMENTOR:

  • Issue of the ECU or the hydraulic block: It can only be altered, and in this situation, you will have to go through a professional, but if it’s dead, it could cost you around 1000€ to change the ECU and 1500 to 2000€ if you have to change both of them.
  • Electrical problem: Once you’ve identified an electrical problem with your manometer, if it’s only a fuse or a relay, count around 10€ maximum, otherwise you’ll have to repair the wiring harness.
  • A defective sensor: Sometimes a simple cleaning of the sensors will be enough to get rid of the problem, otherwise changing a sensor can cost up to a few hundred euros.

To discover more tips on the CUPRA FORMENTOR, take a look at the CUPRA FORMENTOR category.