Regardless you feel you can’t see properly through the night, whether you feel you’re lighting too low or too high, in all of these situations, there’s only one component of your motor vehicle to blame – your low beams. Although this adjustment may seem simple thanks to the thumbwheel on your dashboard, a full adjustment is much more technical than this simple realignment, and in this content page, we will see how to adjust the low beam lights of your Mercedes Sprinter 2? For this, first we will see why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Mercedes Sprinter 2.
Why adjust the low beam lights of your Mercedes Sprinter 2?
So let’s commence our content page with the point of adjusting the low beam lights of your Mercedes Sprinter 2. For a lot of people these lights are well enough adjusted, and it seems that they light up enough at night. Sadly this is not constantly the case and verifying this setting, either because the low beams of your Mercedes Sprinter 2 are not lighting up well, or because you have the sense that they are too weak or too strong is a good option .
Adjusting the low beam of your Mercedes Sprinter 2 for safety is a good option.
To begin, the adjusting of the dipped headlights of an Mercedes Sprinter 2 must be done for a simple safety purpose. Regardless it’s for you, or for the other users you come across during your night journeys. In reality, if you don’t see enough, the risk is to fail to see an obstacle on the road, or to predict a curve badly. In contrast, if your lights are too strong, you risk dazzling the car owners in front of you, and thus putting yourself at risk. It is consequently imperative for others as well as for you to have an optimal setting of your parking lights.
Setting the low beam headlights of an Mercedes Sprinter 2 for legal reasons
Moreover to safety, there is a law that regulates the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at least 30 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Mercedes Sprinter 2?
We will now go forward to the section that concerns you the more in this content page, how to adjust the low beams of his Mercedes Sprinter 2? This setting may seem a bit complicated, but if you follow the guidelines you should be able to do it without too much issue.
Preparations to set the low beam of a Mercedes Sprinter 2
To start, you will need to prepare your motor vehicle to adjust your low beam lights in good conditions, here are the preparations to do:
- Place your motor vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure rigorously.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unnecessary weight from the motor vehicle, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Mercedes Sprinter 2
Once your motor vehicle is in position, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then move back your motor vehicle up to a distance of between 7 and 10 metres. For the rest of the task here are the guidelines to follow:
- Open your bonnet, identify the screws for horizontal and vertical adjustment of the lights of your Mercedes Sprinter 2 (they are commonly marked, and those above must adjust the verticality and those on the side adjusts the horizontality of the adjustment).
- Use a cloth or something else to hide the light on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most powerful part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical manipulation, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, verify that the low beam setting of your Mercedes Sprinter 2 is consistent on the road, do not hesitate to verify that it has been driven, on occasion it may move.
.
If you want to adjust the fog lights on your Mercedes Sprinter 2, please go through our content page on this subject.
To get more tips on the Mercedes Sprinter 2, take a look at the Mercedes Sprinter 2 category.
