Regardless it’s for your own safety, for roadworthiness tests or to avoid a fine, ensuring that your headlamp bulbs are always effective is extremely important. In fact, bulbs are wearing units that will surely burn out after some time and consequently need to be swapped out. You’re most certainly in this article because one of your parking lights is burnt out and you’re struggling with how to change your Ford Transit Connect’s license plate bulb, we’ve written this content to help you do it by yourself and not have to go to your auto mechanic. Firstly, we will take a look at changing the license plate bulb from the outside, secondly, how to change the license plate bulb without outside access, and thirdly, how to change the rear license plate bulb of your Ford Transit Connect.
How to change the license plate bulb on your Ford Transit Connect coming from the outside
This solution is the simplest of the two, in reality, for this one you will only require to take off the protective covers of the bulbs. Sadly on some years or packages of car these covers do not open from the outside and if this is the situation we will dedicate a moment on in the second section of this article to teach you the approach.
So let’s start with swapping the number plate bulb by going through the outside of your Ford Transit Connect. Regardless it’s the front or the back of your automobile the technique will be identical.
Here are a few simple actions to follow to carry out this maintenance:
- With the engine turned off, disconnect the battery terminals from your car
- Face your license plate and use a flat screwdriver or knife to insert the flat part into the notch provided for this intent (generally on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Ford Transit Connect
- Use your screwdriver or knife to eject the bulb from its placement, in the event you are worried of breaking something, you can as well do it with your fingers.
- Finally, position the new license plate light bulb
- Last stage, before reassembling, reconnect your battery and test the light to confirm the successfulness of the procedure.
.
How to replace the number plate bulb on your Ford Transit Connect without outside access
Second section of our item, change this license plate bulb on your Ford Transit Connect without external access. Most often you will be able to access it, but some series (often at the rear does not allow this access).
How to change the front license plate bulb on my Ford Transit Connect
To change the one on the front plate, nothing could be less difficult, you will have to position yourself under the automobile (ideally put on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, generally kept by two soft plastic tabs by pressing on both at the same time, then now that you have your license plate bulb block in hand, Take off the plastic that acts as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be mindful not to put in too much force otherwise you will break the plastic cover), and you will simply have to take off the burnt-out license plate bulb and swap it with the new , then verify and reassemble the whole thing.
How to change the rear license plate bulb on my Ford Transit Connect
Finally last option, you must change the bulb on the backplate of your Ford Transit Connect, but you cannot really open the cover from the outside of your automobile. In this instance, here is the tactic to carry out this task:
- Unplug the battery from your Ford Transit Connect
- Find the spot of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever delicately on all the frame of the trunk to remove it.
- Once located, before removing the bulb holders, disconnect the holders for easier access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Replace the burnt-out license plate bulb on your Ford Transit Connect, test it and reassemble it, watching the clips on the trunk liner
.
.
There you have it, you have discovered the main techniques for swapping license plate bulbs on your car, take notice that on some models the methodology may be a bit different but you should be able to accomplish it following the explanation of this document. If you can’t do it, don’t hesitate to go to your garage area it would be a shame to break a part of your Ford Transit Connect. If you want to change other bulbs like the position light bulbs on your Ford Transit Connect or the low beam bulbs on Ford Transit Connect, don’t hesitate to browse our content articles which demonstrate you the operation to follow.
To find more tips on the Ford Transit Connect, take a look at the Ford Transit Connect category.
