Whether it’s for your personal safety, for roadworthiness testing or to avoid a fine, being certain your headlamp bulbs are all the time functional is very important. In reality, bulbs are wearing auto parts that will undoubtedly burn out after some time and consequently need to be changed. You’re most certainly on this site because one of your parking lights is burnt out and you’re wanting to know how to change your Volkswagen New Beetle’s license plate bulb, we’ve written this content to help you do it by yourself and not have to go to your auto mechanic. Firstly, we will look at changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Volkswagen New Beetle.

change-license-plate-bulb-volkswagen-new-beetle

How to replace the license plate bulb on your Volkswagen New Beetle coming from the outside

This approach is the most simple of the two, actually, for this one you will just require to take away the protective covers of the bulbs. Unfortunately on some years or packages of car these covers do not open from the outside and if this is the situation we will spend a moment on in the second section of this article to explain the method.
So let’s start with changing the number plate bulb by going through the outside of your Volkswagen New Beetle. Whether it’s the front or the back of your automobile the operation will be identical.
Here are a few simple actions to stick to to conduct this maintenance tasks:

  • With the engine off, disconnect the battery terminals from your car
  • Position yourself in front of your license plate and use a flat screwdriver or knife to place the flat part into the notch supplied for this intent (in most cases on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Volkswagen New Beetle
  • .

  • Use your screwdriver or knife to eject the bulb from its spot, if you are scared of damaging a thing, you can as well do it with your fingers.
  • Finally, put the new license plate light bulb
  • Last step, before reassembling, reconnect your battery and test the light to confirm the success of the operation.

How to replace the number plate bulb on your Volkswagen New Beetle without outside access

Second section of our article, change this license plate bulb on your Volkswagen New Beetle without external access. Most often you will be able to access it, but some series (often at the rear does not allow this access).

How to replace the front license plate bulb on my Volkswagen New Beetle

To replace the one on the front plate, nothing could be less difficult, you will have to put yourself under the automobile (ideally put on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, in most cases kept by two soft plastic tabs by pressing on both simultaneously, then now that you have your license plate bulb block in hand, Take off the plastic that acts as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be careful not to apply too much force or you will break the plastic cover), and you will just have to take away the burnt-out license plate bulb and change it with the new , then check and reassemble the whole thing.

How to replace the rear license plate bulb on my Volkswagen New Beetle

Finally last possibility, you must replace the bulb on the backplate of your Volkswagen New Beetle, but you cannot really open the cover from the outside of your automobile. In this case, here is the tactic to execute this operation:

  • Disconnect the battery from your Volkswagen New Beetle
  • Find the spot of your light bulbs from the outside.
  • From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever carefully on all the frame of the trunk to remove it.
  • Once located, before removing the bulb holders, disconnect the holders for easier access.
  • Using a screwdriver, lever the two plastic parts to remove the bulb holder
  • .

  • Replace the burnt-out license plate bulb on your Volkswagen New Beetle, test it and reassemble it, paying attention to the clips on the trunk liner

.
There you have it, you have learned the main solutions for changing license plate bulbs on your car, remember that on some models the methodology may be a bit different but you should be able to accomplish it following the outline of this article content. If you can’t do it, don’t hesitate to go to your mechanic it would be a shame to break a part of your Volkswagen New Beetle. If you need to change other bulbs like the position light bulbs on your Volkswagen New Beetle or the low beam bulbs on Volkswagen New Beetle, don’t hesitate to consult our content articles which explain you the operation to follow.

If perhaps you have any further questions about the Volkswagen New Beetle, do not hesitate to consult our Volkswagen New Beetle category.