We will try again in this article to help you to fix the small problems related to your car. We have not too long ago seen how to unblock a fuel door, or a tank cap, in this article we will focus on an irritating problem that can be dangerous in bad weather conditions, being a victim of wiper stuck on Renault Master 2 . And to correct this, we will first try to understand why the wipers on your Renault Master 2 remain stuck and, secondly, how to unblock them.

wiper-stuck-renault-master-2

Why does the wiper of my Renault Master 2 stay stuck?

So we will start our content page with the explanations of the stuck wipers of your Renault Master 2 . First of all we will focus on the front wipers and in a second time on the rear wiper.

Why are the front wipers on my Renault Master 2 stuck in up or down position?

We will proceed through one by one the different problems that can cause the front wipers of your Renault Master 2 to get stuck :

  • One of the most general causes of front wipers getting stuck on your Renault Master 2 is related to the engine unit that drives them, in reality, these engines can, over time, lose power, and sooner or later need to be changed. You should find out before the total blockage of your windshield wipers that they work much slower.
  • Less general, but it can still happen, is that your front wiper blades are blocked due to an object that prevents the blades from functioning, have a look up to the axis of the blades.
  • If it is a lack of lubrication, you will locate that your front wipers are going slower, verify fairly quickly the cause of the trouble or else the engines will be forced and damaged.
  • It is possible that the front wipers of your Renault Master 2 may not function due to a faulty comodo. To test this, you need to disconnect the output wires and connect them together, if the wipers are functioning, the comodo is responsible for the problem.
  • Finally, last opportunity, the front wipers of your Renault Master 2 are blocked due to a power failure, so you will have to verify two auto parts, the relay and the fuse.

Why is the rear window wiper on my Renault Master 2 stuck?

Concerning the stuck rear window wiper of your Renault Master 2 , the origins of your problems are more or less the same. Although there is only one wiper blade at the rear of your car, there are still some dedicated auto parts that can cause problems only on the rear windshield of your Renault Master 2. So, make sure to carry out similar inspections as seen in the previous component of this content page.

What can I do to unlock the wiper on my Renault Master 2?

At last, for this second part, we will see what solutions are available to you to make certain that the wipers on your Renault Master 2 are unlocked and that they function properly again.

How to unlock the wipers of my Renault Master 2?

If it is for the front windshield wipers or the rear windshield wiper, the solutions will be similar and we will highlight them one after the other in this component, it is up to you to adapt them to the component that concerns you. If you have other blocking problems such as a fuel door stuck on Renault Master 2, do not hesitate to consult our article on this problem.

  • In this case, you will have to identify the engine unit, then disconnect the power cables of this one (be cautious there must be several of them related to the different speeds of sweeping), then take out the brushes and the linkage. At last, you will have to unscrew these anchoring points which are generally fixed on silentblocks and reassemble a new wiper motor on your Renault Master 2
  • .

  • In this situation, it will be quite basic but expensive to replace your commodo, the component generally costs around 200€, once tested you will be able to disassemble your commodo by removing the cover from the back of the steering wheel then disconnecting it and removing it with the fixing screws, you will just have to reassemble the new one.
  • Renault Master 2 wiper blocked caused by a power failure: In this last situation, you will have to identify the origin of the failure (fuse or relay) and replace the faulty component

.

If you need more tutorials on the Renault Master 2, go to our Renault Master 2 category.